Always wanted to get into reef keeping so I'm jumping in with both feet. (Like them of hate them, you can thank the BRS 52 weeks of reefing for pushing me over the edge into the hobby.) Below is the start of my build for the conference room at my office. I'm doing a ReefSavvy 700+ gallon tank which is currently in production. We are an HVAC & Plumbing contractor, so I've cladded the fish room in stainless steel. Installed a linear floor drain at the door opening should anything go wrong. Also have a stand for the water tanks being fabricated in my shop that will also be in stainless. The tank will be flush with the opening for the conference room. Dimensions are 96"L x 36"W x 48" tall. Right now, I've got the Pukani soaking with an anticipated install date of Feb/March. I'll make sure to keep pictures coming as progress is made.
Mixing station prior to the stainless steel stand which is currently in fabrication in my weld shop.
Entry doors to the tank room.
The view when the double doors are open. Eventually the tank will go in the framed opening and the sheetrock cut out. (Yes, I know the electrical isn't exactly code compliant, or safe...) It's on a GFCI though...
The RODI system and service sink. The other piping is the domestic how water system for the plumbing fixtures in my building.
Mixing station prior to the stainless steel stand which is currently in fabrication in my weld shop.
Entry doors to the tank room.
The view when the double doors are open. Eventually the tank will go in the framed opening and the sheetrock cut out. (Yes, I know the electrical isn't exactly code compliant, or safe...) It's on a GFCI though...
The RODI system and service sink. The other piping is the domestic how water system for the plumbing fixtures in my building.