Bashsea Twisted Skimmer Recirculating CO2

robmiller2

Well-Known Member
View Badges
Joined
May 7, 2018
Messages
703
Reaction score
714
Location
Chesapeake, VA
What state or country do you live in
Virginia
Rating - 0%
0   0   0
I am wondering if anyone has set up a Bashsea or similar skimmer for recirculating CO2. It seems that I will have to drill a hole in the collection cup to allow for the line to fit. Looking for some tips or any help really.
 
I am wondering if anyone has set up a Bashsea or similar skimmer for recirculating CO2. It seems that I will have to drill a hole in the collection cup to allow for the line to fit. Looking for some tips or any help really.
I need help with this too. I saw the old thread but it doesn't look like it's recirculating.
 
Due to the way the skimmer is made you either have to drill a hole in the skimmer lid or order a lid with one drilled in it already. I sent a message to Bashsea and they said to drill the lid and not the clear portions because they are easier to crack.
 
I have the Bashsea skimmate container and I’m trying to pull from the air vent so there’s no holes that need to be drilled. I have yet to see how well it’s working though. One thing I did see is if you power down the skimmer, you have to pull the hose out of the collector to allow the air pressures to equalize. This was a basic BRS housing with the color changing media. I just threw it together to see if I could see any improvement before making it look pretty. Hopefully it works…

IMG_0507.jpeg
 
As it turns out - that method isn’t working very well. Some air is lost in the discharge water. That causes a bit of a vacuum to form and the water level starts to rise over time. There needs to be a bit of an air vent to allow some air in and compensate for the lost air. I may drill a small hole in the cap of the skimmate chamber to balance the pressures. That would be a lot better than trying to drill the lid of the inner itself.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new