Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
There’s loads of us using Triton through Red Sea tanks bro - the 10x turn over is just the recommended amount. Just get what you can achieve without noise disturbing you.
You can always add an additional powder head in the algae section if it’s needed [emoji1303] Triton other methods is also worth considering - I run a ClariSea roller with mine [emoji4]
Where did you buy your ClariSea?
Just a heads up on running Triton on your RSR 450... I don’t think you’ll be able achieve the Triton recommended 10 x display volume turnover.
I set up a RSR 525XL (108 gal display) with the intent of running Triton. Unfortunately, I am unable to get much over 600 gph flow (as measured by my Apex flow sensors) through the plumbing before it starts making all sorts of disconcerting noises. Gurgling and whistling sounds... like it’s about to burst!
I contacted RedSea and asked how much flow could safely be handled by their plumbing. Unfortunately, I got a response back from a sales rep that really didn’t understand their product. “We recommend a pump that can do 1060 gph.... so that’s the maximum flow you can have....” She did not understand the concept of head pressure, and the fact that if you recommend a pump doing 1060gph, you’re actually getting a much lower flow rate out of the return nozzle.
I also tried the contact Triton (on the R2R forums) to see if they had any recommendations on how I should modify my system to compensate for the fact that I can’t run at the recommend 10x turnover. Never received a response from them.
I would love to know if you’re finding the same issue and if you’ve found a work around!
I have been so busy with life, work, my personal business, my wife's business and so on, that I just haven't had time to post at all on this site. I apologize if I have left anyone hanging. I set this tank up right at about 3 years ago. I had instant success and rode that high for quite a while. I then had some ups downs the last year or so. Which brings us to today... basically an empty tank.
One of my favorite quotes... that I changed a couple of the words to fit this crazy hobby:
“On this road called reefing, you have to take the good with the bad, smile with the sad, love what you got, and remember what you had. Always forgive, but never forget, learn from your mistakes, but never regret. Reefs change. Things go wrong. But just remember, the ride goes on.” - unknown
8 months ago... rocking pretty good:
IMG_1417 by Toby Broadfield, on Flickr
IMG_1491 by Toby Broadfield, on Flickr
..... and today:
IMG_2060 by Toby Broadfield, on Flickr
I slowly lost basically all of my coral.... literally the only thing that was not affected was my clam. As a last ditch effort to try and figure out what was wrong, I ordered up a Triton test. As expected, it came back spotless and everything where it should be. So I'm not sure if at some point something happened and it just couldn't recover or what... a crash I guess. So I'm taking this opportunity to start over. I figure this is a good opportunity to start the Triton Method. Start with fresh artificial rock, substrate and get this tank down to the basics. No media, just chaeto... which obviously is the main contributor in nutrient control when using the Triton Method. I will be running a new sump in order to properly run the Triton Method... large refugium etc. New plumbing/manifold to utilize the Neptune flow sensors and a couple of the small AquaMaxx reactors in case I need to run carbon or similar in an emergency. Stay tuned!
Current state of tank:
FTS by Toby Broadfield, on Flickr
FTS + Stand by Toby Broadfield, on Flickr
IMG_6030 by Toby Broadfield, on Flickr
I am absolutely no stranger to posting build threads on a forum, just not of a reef tank... it's always been of vehicles. So this is my first!
I started with my first reef setup a couple years ago with an Innovative Marine 30 gallon Fusion. Great all-in-one tank, but I decided I wanted something bigger and with separate sump etc. When I saw that Red Sea was going to be releasing their new Reefer series, I started saving my money. I received it about 4 weeks ago and have already got most of it up and running... here's what I got going on so far.
**First off, I want to thank my wife! She agreed that it would be a good idea to convert our dining room into a reef viewing room.**
Ran home from work to meet the freight driver and we put it in the garage. I did a quick visual inspection before I went back to work.
IMG_3820 by Toby Broadfield, on Flickr
IMG_3819 by Toby Broadfield, on Flickr
After work I did a quick leak test and all was good. I then proceeded to assemble the stand.
IMG_3825 by Toby Broadfield, on Flickr
I have (3) Hydra 52's going over it, so I got the rails all mounted before I shoved the stand up against wall.
IMG_3826 by Toby Broadfield, on Flickr
Had my neighbor pop over and help me heft this thing onto the stand. I will say that 5/8" glass isn't light. I quickly started toying with scape ideas:
IMG_3899 by Toby Broadfield, on Flickr
This is one of my helpers:
IMG_3887 by Toby Broadfield, on Flickr
Here is what I came up with on the scape... got it all cemented together so nothing budges. Also filled the tank with salt water and sand. There's plenty of clearance all around the rock for flow, cleaning of the back glass and swimming lanes for larger fish.
IMG_3937 by Toby Broadfield, on Flickr
Our viewing chairs arrived to help finish off the room. We still need to get a different light fixture for the room, but that's the least of my concerns at the moment.
IMG_3978 by Toby Broadfield, on Flickr
Next up, basement plumbing for salt water mixing, water changing etc!
Hi Toby, amazing tank. I'm in the process of setting up my 450 now and following your tips and tricks. You mention here about adding sand and I'm sure out of the 1000 plus pages it is discussed further. To save time in search could you please refer me to the pebble-like sand you used (link) and whether or not you'd suggest it? I'd like to try something different and feel that fine sand has a higher risk is scratches. Any help you can provide will be greatly appreciated. Thanks in advance for your time and consideration.
Bobby C.
Incloud Design