BRS silicon tubing question.

[Busa1340]

Just got it in today 4 feet of it and everything is great but I was just wondering if anyone else uses this stuff? They state to run it at short lengths between pump n pvc. I'll be running about 3-4 feet of it for return. This stuff is so flexible it feels like it won't take a lot of pressure. Anyone had any issues with it? Can I run 3-4 feet? The stuff looks great and took me seconds hooking it up to the barb fittings just wanted to get some options if you guys use it to. Thanks.

 

[143MPCo]

most of the stuff out there can hold 20psi...
I would NOT go anymore!

 

[KingTriton]

I use it for everything. I would never go back to vinyl.

 

[Busa1340]

most of the stuff out there can hold 20psi...
I would NOT go anymore!

3 feet should be ok?

 

[Busa1340]

I use it for everything. I would never go back to vinyl.

How long are your runs? I'm using the 3/4 at about 3 feet going to get the jeboa dct8000 return.

 

[KingTriton]

How long are your runs? I'm using the 3/4 at about 3 feet going to get the jeboa dct8000 return.

Pretty much how I have mine

 

[KingTriton]

ksldjfsdj

I need to reach 50 post to sell a skimmer thx ;)

 

[Busa1340]

Pretty much how I have mine

Awesome that's about the length I'll have mine thanks for the pic n info!! Good luck on that skimmer lol

 

[Jlobes]

I use it and so far, so good! install was a breeze, and used plastic clipclamps to secure it. I only use it on my returns, from the TUBV up to the bulkheads and for feeding my reactors. probably have 2' as longest run

 

[Busa1340]

Pretty much how I have mine

 

[Busa1340]

I use it and so far, so good! install was a breeze, and used plastic clipclamps to secure it. I only use it on my returns, from the TUBV up to the bulkheads and for feeding my reactors. probably have 2' as longest run

Nice thanks !