Bryopsis Cure: My Battle With Bryopsis Using Fluconazole

Did Fluconazole Kill all of your Bryopsis?

  • Yes

  • No

  • I'm treating my tank with it now.

  • I love Bryopsis and I'm mad that everyone is killing it.


Results are only viewable after voting.

edosan

Well-Known Member
View Badges
Joined
Apr 6, 2015
Messages
527
Reaction score
378
Location
Chile
Rating - 0%
0   0   0
After 1 week my results are:
- Bryo is definilty out by the day
- Some corals where afected, milleporas (3) spatulatas (1) (Of more than 100 I have), with RTN. I did nothing but feed the corals with reeffrenzy on day 4.
Before dosing fluc, milles where in great shape. All the resto of the corals on my main tank looks good so far (check the signature if you want to see the tank I am treating)
Yesterday I made a large water change and tomorrow I will start with AC again.

I will do it again...donno, if the only corals afected where those one (too soon to tell), I will in the future but taking those corals out. One of my milles was growing great and got bleached in 2 days! :( maybe it has nothing to do with Fluconazole but is the only thing I made different.

But I must say, Fluconazol work! and probably work perfect in 98% of the tanks, but if you have delicate SPS acros, a word of caution.
 
Last edited:

Scorpius

2500 Club Member
View Badges
Joined
Mar 6, 2017
Messages
3,662
Reaction score
3,755
Location
Indiana
Rating - 0%
0   0   0
Sorry about that effect. ;)

I'm just trying to figure out how the need for repeat treatments add up to success? (That's not how antibiotics are supposed to be used.)

The treatment works, BTW. How is Bryopsis getting back into your tank repeatedly?
I don't know. I can say this time around the Bryopsis is turning white faster, but I'm running T5's as supplements this treatment. More light=more Bryopsis death?
 

FDAWG

Active Member
View Badges
Joined
Sep 15, 2014
Messages
427
Reaction score
331
Location
Southern California
Rating - 0%
0   0   0
I started my first dose yesterday and all I can say so far is my blastos and torch coral are mad . I hope they will recover.
 

Lninwa

Well-Known Member
View Badges
Joined
Jun 10, 2012
Messages
505
Reaction score
225
Location
Vancouver, Wa
Rating - 0%
0   0   0
The fluconozole arrived today so after a water change ill put in the flucon. So I understand correctly I take the skimmer offline for the 2 weeks?
 

FDAWG

Active Member
View Badges
Joined
Sep 15, 2014
Messages
427
Reaction score
331
Location
Southern California
Rating - 0%
0   0   0
That's odd. None of my coral have ever been bothered by Fluconazole.
I can't say it's 100% Fluconazole. All I'm saying is I never seen my blastos or torches ever recede so bad after 1 day. Only thing I did different in my routine was dose the meds.
 

ksanfranfan

Active Member
View Badges
Joined
Oct 26, 2007
Messages
323
Reaction score
317
Location
Dallas, TX
Rating - 0%
0   0   0
The fluconozole arrived today so after a water change ill put in the flucon. So I understand correctly I take the skimmer offline for the 2 weeks?
You can either take your skimmer offline for the 14 day treatment or lower the water level in the skimmer so that it doesn't produce skimmate and over flow into the skimmer cup.
Some people did one or the other and then returned their skimmers back to normal production after 4-5 days. The reasons for the most part in those cases wad due to a decline in water parameters.
If possible, it's best to allow the medication to take full affect without interference by being removed by the skimmer for the duration of the treatment.
 

Scorpius

2500 Club Member
View Badges
Joined
Mar 6, 2017
Messages
3,662
Reaction score
3,755
Location
Indiana
Rating - 0%
0   0   0
I have a very large Torch coral that has had zero issues. Wonder what's up with your setup.
 

Timothy Curtin

New Member
View Badges
Joined
Feb 19, 2017
Messages
2
Reaction score
0
Rating - 0%
0   0   0
I dont see this question up there and I'm not sure of the answer. Should I remove my chemi-pure blue bags as well during the treatment?
 

ksanfranfan

Active Member
View Badges
Joined
Oct 26, 2007
Messages
323
Reaction score
317
Location
Dallas, TX
Rating - 0%
0   0   0
I dont see this question up there and I'm not sure of the answer. Should I remove my chemi-pure blue bags as well during the treatment?
Yes, remove chemi pure during the treatment. Chemi pure products have the potential to remove the medication before it has the required amount of time to treat the tank.
Unfortunately you'll have to toss the bag and start with a fresh one.
 

John kennington

Active Member
View Badges
Joined
Nov 27, 2015
Messages
155
Reaction score
44
Rating - 0%
0   0   0
*******Important*******

Please read the Frequently Asked Questions(FAQs) located right after the pictures before you treat your tank.It should answer most of your questions and help you avoid some mistakes.

First, I want to say that I am in no way shape or form telling anyone that they should try this in their tank.(at least not until we see how this goes) Yes Fluconazole can be used as an anti-bacterial med for fish diseases and I haven't seen any adverse reactions from using it, but I just don't want anyone to come back and say that they killed their fish/corals or inverts and blame me. This was not my discovery as I am just following what some others have already done. If you try this it is at your own risk and don't shoot the messenger. :)


Okay so like I have said in another Fluconazole thread,I always inspect and QT everything before it goes into my tank. I had several frags in qt for a few weeks and all seamed fine. Before transferring them to my DT I brushed off what looked like regular green surface algae and thought nothing of it.Well after about a month all three frags had a healthy helping of Bryopsis growing on them.
I've had to deal with this years ago so I know what kind of a struggle it can be. I did not want to just sit around and hope this cleared itself up because I knew this could get really bad.I had a tank full of Bryopsis years ago and tried everything I could to get rid of it and it just kept spreading everywhere.
Finally after gallons and gallons (system was almost 400gls)of Kent Tech M I was able to melt the Bryopsis away but it was no picnic.

Now, after learning that Kent Tech M has changed and doesn't work anymore or is hit or miss now,I read about some people having success against Bryopsis using Vibrant.I tried Vibrant for a couple of months and it did damage the Bryopsis fern/fan leaves but it wouldn't kill it off completely. I know people say to just give it more time but let me show you what can happen when you give Bryopsis time in your tank.(BTW I'm not knocking Vibrant or @UWC I think he has been a stand up guy on this forum and some people have had great success using their products)

They did not call me the Bryopsis King for no reason........

IMG_2539_zpstlsj2jqx.jpg


It was like this across the entire tank. Notice for you tang lovers out there that mine had no interest what so ever in eating any of the Bryopsis.If they would have kept the rocks picked clean this would not have reached being the forest that you see.I have more pics but it's ugly and I think you get the picture.As you can see,this would be my reason for NOT wanting to wait too long on this.

Anyway this brings me up to using Fluconazole. After searching the good ole web I found that some people(some over seas) were using Fluconazole in a one time dose to kill off Byropsis. At first I thought that this was too good to be true.I mean most people were saying that their tanks were Bryopsis free in about 10-15 days give or take a few days. Then they started posting before and after pics and also saying that they had not lost any fish or corals!! OMG sign me up! I thought. Well after doing a little more research I found out that Fluconazole can be used to treat infections/diseases in fish and that the dosage I would need to use was considered somewhat "safe" for the fish so I placed an order..

FishFlucon_zpsnanbm9t0.jpg


There were two different dosages that were being used. One was 9mg/L and the other was 150mg/30L which is 5mg/L. I have 200 gallons of total water volume in this system which is 757L. So 757L x 9mg/L would be a dose of 6813mg. 757L x 5mg/L would be a dose of 3785mg.
I went with 4000mg so it was 20mg per gallon.
Everyone was seeing their results when using the lower dose so I went with the lower dose.

*Also note that if I were using Fluconazole to treat my fish for infections I would need to dose this same amount every 24hrs for no less than 5 days but not more than 10 days.

This made me feel somewhat better about using it because this would be a one time dose and not building up 5-10 times as much in my aquarium over the course of 5-10 days.

So let the battle begin!!

Before I dosed the tank I turned off my actinic lighting,changed my filter socks from 200 micron to mesh filter socks,turned off the UV channels on my Radions,removed my GFO/GAC filters and removed my skimmer cup.

I emptied 20 of the 200mg capsule in a cup of tank water and stirred for a minute or two.(throw away the empty capsules) Not all of the medication dissolved but that's okay. I then poured the entire cup in my DT in front of a powerhead.
Cloudiness went away after about an hour. Fish,corals and inverts didn't seem to notice any change at all.

I apologize in advance for my blurry pics as photography is not my strong suit.

Edit: I know some people don't like reading through entire threads and just want to see the results so I'll keep this first post updated with all the pics.

Before the treatment started...
IMG_3216202_zpscoiwvocv.jpg


Day 1
IMG_322520copy_zpsoguugcqp.jpg


Day 2
IMG_3237_zpsqvej9tkm.jpg


Day 3
proxy.php


Day 4
proxy.php


Day 5
proxy.php


Day 6
proxy.php


Day 7
Day720of20treatment_zps84kdz4dh.jpg


Day 8
Day820of20treatment_zps7aexqmnm.jpg


Day 9
proxy.php


Day 10
Day1020of20treatment_zps8edzv8zw.jpg


A big thank you to @stevo01 for writting the FAQ for this thread.

Frequently Asked Questions (FAQs)

****This treatment seems to work best in well lit areas of the tank. Some people are noticing quicker results by adding light to the shaded areas of their tank.*****

Q: Will Fluconazole kill Bryopsis?
A: YES. As of 2/2/17 Fluconazole is completely killing all Bryopsis. There have been no reports of it NOT working.

Q: How does Fluconazole work?
A: Fluconazole blocks the enzymatic pathway for the production of ergosterol. Ergosterol is essential for maintaining the cell wall integrity of plants. Ergosterol (ergosta-5,7,22-trien-3β-ol) is a sterol found in cell membranes of fungi and protozoa, serving many of the same functions that cholesterol serves in animal cells.


Q: Will Fluconazole kill anything else in my system?
A: So far Fluconazole has not killed anything other than bryopsis and GHA. Everything and I mean EVERYTHING else is unaffected.

Q: Where do I get Fluconazole?
A: There are many sources online. The most popular/best choice is to purchase the medication in 200MG CAPSULE.

Q: How much Fluconazole do I use?
A: The suggested dose is one SINGLE dose in the amount of 20mg per gallon of water. There are reefers who are experimenting with using 10mg per gallon right now, but none with completing the 1st "round".

Q: Do I do a WC before treatment?
A: Yes. It would be a good idea as the treatment is for 14 days and expect an increase in NO3.

Q: How do I prepare the the medication?
A: I have noticed with the capsules it is very tough opening them without crushing the capsule. This is what I did. Use a razor blade and cut off the rounded end of the large outer half of the capsule. Then you can very easily pour the contents out into a glass of RODI water or tank water. The amount of water doesnt matter, but make it enough to be able to mix the med up. The med isnt very soluble, but mix it up best you can. Preferably dose at night when fish are asleep. Then pour the entire dose into the DT, or sump. Some have put it into their sump socks. I dosed directly into the DT.

Q: How long is the treatment?
A: 14 days.Maybe up to 21 days if you still have GHA present in the tank.

Q: Do I remove my carbon?
A: Yes.

Q: Do I remove my skimmer cup?
A: Its suggested for at least the first few days if not the entire treatment remove your cup. If you pull your cup you may continue to run the skimmer, or turn the skimmer down as to not allow the skim to enter the cup. You do not want to remove the med.

Q: Do I take my ATS offline?
A: Yes. Completely sanitize it, and reintroduce it after all the bryopsis is 100% gone.

Q: Do I take my bio reactor offline?
A: No.

Q: Do I take my GFO offline?
A: No GFO will not remove the meds.It will also help to remove the po4 from dying algae.

Q: Do I continue to dose H2O2?
A: Yes. It will not interact with this med.

Q: Do I continue to dose Vibrant?
A: Yes. This SHOULD not interact this med. It may help to dose Vibrant as it will assist in NO3 export.

Q: Do I continue to dose colors, alk, calcium, and magnesium?
A: Yes.

Q: Should I change my lighting?
A: No.

Q: If I take my carbon reactor, or any other equipment off line/out of the tank, do I just put them back into the system after treatment?
A: No. Do not reintroduce the algae. It would be best to sterilize any equipment and throw away old media for reactors.

Q: Is it ok to take out my chaeto, or other algae's then put back after treatment?
A: No. this may reintroduce the algae. Leave the macros in the tank.

Q: Do I take my carbon reactor offline?
A: Yes.

Q:Should I stop using Purigen during treatment?
A:Yes.

Q: Do I take my UV Sterilizer offline?
A: Yes.

Q: Do I do a WC during treatment?
A: No. Unless it cannot be avoided and a WC needs to be done to save life.

Q: Will Fluconazole kill my chaetomorpha or other beneficial maco's?
A: The treatment has not harmed any macro algae.

Q: Will Fluconazole kill the parasitic algae known to burrow through LPS corals?
A: This is currently being researched.

Q: What other nuisance algae's will be killed by Fluconazole?
A: Fluconazole kills the green algae Derbesia also known as GHA. It seems that GHA takes longer to kill than the bryopsis but it still dies. Bubble algae is unknown due to most reefers treating their tanks have been using Vibrant. Vibrant kills bubble algae very well.

Q: When do I do a WC?
A: At the end of the full 14 day treatment. After treatment has completed you will go back to your normal running system. Do a WC as your NO3/PO4 levels may be high from a lot of dead algae.

-Stevo





This treatment has been a huge success.For so many years we have had to deal with this terrible algae. Well now we can finally say that beating Bryopsis is a reality. No more tearing down your tanks. No more endless hours of pulling and picking at this mess. Fluconazole has made the eradication of Bryopsis from our tanks quick,easy and painless.Please let everyone you know in the reefing community about this treatment. The more people who know,the better.

Testing by @twilliard will be ongoing to determine a minimum effective dosing plan in the near future.
If you still have any questions about using Fluconazole,don't hesitate to ask.
Thank you to everyone who has been and continues to help and contribute in the thread. R2R has the best reefing community around!!!

NCreefguy
Please just let me know where I can buy it from. Thanks!
 

Ghxst

Well-Known Member
View Badges
Joined
Dec 6, 2014
Messages
586
Reaction score
415
Location
Colorado
Rating - 0%
0   0   0
I made a separate post but maybe it's a better question here. Is this the same algea you are trying to kill with this med?;

IMG_6022.JPG


I can get a picture of what ever part will make it easier to ID, with or without a scope.
 

Ghxst

Well-Known Member
View Badges
Joined
Dec 6, 2014
Messages
586
Reaction score
415
Location
Colorado
Rating - 0%
0   0   0
I skimmed through all 200 pages and didn't see Mine for certain. It is not very fern like, it has sprouts on the end akin to how mature grass sprouts leafs but not ferns all up the stock. Maybe it's still immature, it was like scraggly wire algea before the tank move.


I would love to get a positive ID before attempting fluc so my results are fair. Could anyone ID this for sure and please let me know what picture would be most telling, macro zoom, 40x, 1000x close up on phone, etc... whatever is needed. Thanks!
 

Freshwater filter only or is it? Have you ever used an HOB filter on a saltwater tank?

  • I currently use a HOB filter on my reef tank.

    Votes: 47 26.1%
  • I don’t currently use a HOB filter on my reef tank, but I have in the past.

    Votes: 43 23.9%
  • I have used a HOB on fish only or quarantine tanks, but not on the display tank.

    Votes: 42 23.3%
  • I have never used a HOB on a saltwater tank.

    Votes: 44 24.4%
  • Other.

    Votes: 4 2.2%
Back
Top