Bubble algae question

ytsejam02

Active Member
View Badges
Joined
Aug 15, 2016
Messages
169
Reaction score
72
Location
Central CT
Rating - 0%
0   0   0
I have a 2" acan resting on my substrate with bubble algae on it. If I dipped it, would that get rid of the algae? I've pulled it out and tried to dispose of he bubbles outside the tank, but they came back.

Thoughts?

On a side note, oddly, I just noticed today I have a few PINK bubble algae attached to a single empty small shell. Ive removed it, but was surprised by both the color and it's existence. No idea where it came from.
 

SandJ

Valuable Member
View Badges
Joined
Sep 6, 2015
Messages
1,169
Reaction score
2,016
Location
Georgia
Rating - 0%
0   0   0
The red bubble algae is harder to control. I would remove both kinds asap, without popping the bubbles in the water if possible.

I like to use a piece of rigid air line with a tube attached as a syphon hose. That way I can use the rigid airline to dislodge it and if it happens to pop the syphon will hopefully remove the spores and prevent it from spreading.

Also you can cut away part of the frag plug or rock it was growing on to possibly remove any that are just starting to grow.
 
Last edited:
OP
OP
ytsejam02

ytsejam02

Active Member
View Badges
Joined
Aug 15, 2016
Messages
169
Reaction score
72
Location
Central CT
Rating - 0%
0   0   0
The red bubble algae is harder to control. I would remove both kinds asap, without popping the bubbles in the water if possible.
With the green algae, that's a problem, since it's attached to the skeleton of the acan I mentioned.

Any ideas?
 
OP
OP
ytsejam02

ytsejam02

Active Member
View Badges
Joined
Aug 15, 2016
Messages
169
Reaction score
72
Location
Central CT
Rating - 0%
0   0   0
IMG_20170102_091403407.jpg


Here's the little bit of pink bubble algae I removed.
 

SandJ

Valuable Member
View Badges
Joined
Sep 6, 2015
Messages
1,169
Reaction score
2,016
Location
Georgia
Rating - 0%
0   0   0
With the green algae, that's a problem, since it's attached to the skeleton of the acan I mentioned.

Any ideas?

Oops, did not realize it was on the skeleton. Ugh, the only thing I could think of is maybe put a think layer of super glue over the area if it is not in a place where it can affect the flesh of the coral.
 
OP
OP
ytsejam02

ytsejam02

Active Member
View Badges
Joined
Aug 15, 2016
Messages
169
Reaction score
72
Location
Central CT
Rating - 0%
0   0   0
Oops, did not realize it was on the skeleton. Ugh, the only thing I could think of is maybe put a think layer of super glue over the area if it is not in a place where it can affect the flesh of the coral.
That sounds worth a shot. Think I should pop them first? Outside the tank of course... :-)
 

GoJimmy

Community Member
View Badges
Joined
Mar 25, 2016
Messages
90
Reaction score
45
Location
Toronto
Rating - 0%
0   0   0
I had bubble algae on the base of my elegance coral. I removed from the tank, carefully removed the bubble algae by hand and very carefully brushed hydrogen peroxide with a q tip just on the skeleton part avoiding the flesh. It has not come back and it's been more than 6 weeks now. Worked for me
 

acer

Valuable Member
View Badges
Joined
Mar 8, 2010
Messages
1,315
Reaction score
752
Location
Pittsburgh
Rating - 0%
0   0   0
Take the Acan out of tank and scrap the buble Algae off it ,use something with a hard plastic edge. Then use tank water in a small bucket with a power head to rinse it. Even if u damage the Acan a bit, it will recover. You could try a Mithrax crab , but mixed results are reported and chances are it will also danage the coral. Seems that physical removal of bubke algae works best.

Lol, others posting as well. I like the idea of superglue over tge damaged area and the use of peroxide.
 

kb1094

Active Member
View Badges
Joined
Jul 28, 2013
Messages
280
Reaction score
11
Location
Florida
Rating - 0%
0   0   0
Emerald crabs will be your best bet, add a couple of them. Also, try to scrape as much as you can from the corals. Don't do it in the tank because if it explodes inside, more will appear.
 
OP
OP
ytsejam02

ytsejam02

Active Member
View Badges
Joined
Aug 15, 2016
Messages
169
Reaction score
72
Location
Central CT
Rating - 0%
0   0   0
I took it out and used a tiny chisel. Took out as much as I could tell. It was a deep crevice. I superglued over it and put it where I can easily keep an eye on it. If I see it start to come back, emerald crabs are next.

Thx everyone!
 
OP
OP
ytsejam02

ytsejam02

Active Member
View Badges
Joined
Aug 15, 2016
Messages
169
Reaction score
72
Location
Central CT
Rating - 0%
0   0   0
Ok, so the glue didn't work. The bubble algae had a harder time coming back, but it's still there.

So, I think I want to go with an emerald crab, but I'm a little hesitant.

I have two small bubble algae outbreaks, and for whatever reason, they are on the base of two of my acans, one of which I'm fairly fond of.

My concern and question to the group is, how big a risk would it be that, assuming the crab finds the algae and eats it, that he might decide my acan looks tasty as well, if only because it's right there?
 

Ari21

Well-Known Member
View Badges
Joined
May 6, 2015
Messages
614
Reaction score
114
Location
CT
Rating - 0%
0   0   0
I don't think emerald grabs will bother coral but every crag is different and there is always a risk.
 

TOP 10 Trending Threads

WHAT AMOUNT OF LIVE ROCK AND SAND SHOULD BE PRIORITIZED FOR OPTIMAL BIODIVERSITY/FILTRATION?

  • 100% live rock + bagged sand

    Votes: 34 28.1%
  • 100% dry rock + 100% live sand

    Votes: 41 33.9%
  • 50/50 live/dry rock, 50/50 live/bagged sand

    Votes: 27 22.3%
  • 75% live rock, 25% live sand

    Votes: 11 9.1%
  • 25% live rock, 75% live sand

    Votes: 8 6.6%
Back
Top