That front right section looks available for the skimmer with a much higher water level. Turn skimmer section into a fuge.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
If I turn it lower i.e. 2, the cup just fills with water and there is no bubbles in the cup at all. Is that a way to break it in?U have it at 3. Id turn it to off. The lowest setting. Give it a good 24-48hr run time. Than increase to 2
U will prob be skimming at 2.
The micro bubbles in the sump area coming from the bottom of ur skimmer will halt after break in i agree with the others.
-d
I could possible do that, but that is my RO/DI chamber for the ATO.That front right section looks available for the skimmer with a much higher water level. Turn skimmer section into a fuge.
Put ato in return pump section.I could possible do that, but that is my RO/DI chamber for the ATO.
As for the return pump in the skimmer chamber I can't unfortunately do that without redoing the plumbing.
I'll give that a shot, but at max it produces an extreme amount of micro bubbles.Ok im sorry. Turn it to max and lower the water level inside the skimmer.
When u wake up in the morning after.sleep.it will have settled and be at the correct water height per setting. Than increase half of a setting. Till the head foam is at the neck of the skimmer.
D
Great suggestions all around. I think before I try to modify the sump I'll just bring up the water level in the skimmer section which will also bring up the water level in the return chamber. This will be far above the level of the baffle but...will likely have to modify!Put ato in return pump section.
That makes perfect sense, I'll give it a shot!!LOL yes the.micro bubbles will happen more now that we.lowered it. Ull see the foam head turn yellow. Than brown and have some detritus in it. The foam head.will get heavier and heavier with organics and fall down on itself. Eventually that heavy foam head pushes up the lighter foam and u get.skimate. lol.
Uhg i hope thats understandable. I think u got this.figured out.
D
Good luck bud!Great suggestions all around. I think before I try to modify the sump I'll just bring up the water level in the skimmer section which will also bring up the water level in the return chamber. This will be far above the level of the baffle but...will likely have to modify!
Thanks for the help, much appreciated!!Good luck bud!