Build Advice Requested - UNS R60 + Hydros XP10 AWC

  • Thread starter Thread starter ajdichiara
  • Start date Start date
  • Tagged users Tagged users None

ajdichiara

New Member
View Badges
Joined
May 4, 2025
Messages
4
Reaction score
3
Location
Connecticut
What state or country do you live in
Connecticut
Rating - 0%
0   0   0
Hi there — my wife and I had our first child last year and I’m thinking of getting back into the hobby as it will be something to do with him as he grows up, as I remember how how much I loved going to aquariums when I was little and I think this is the case for most kids. One big requirement for me to get a tank up and running again will be automation due to limited time and desire to maintain things manually and so would like to ask for some advice on my current planned build list — main question is around Hydros/AWC feasibility, but definitely open to any other reccos. Here’s what I have so far:​
  • Tank: UNS R60
  • Controller:
    • Hydros X10 + XP8 or Hydros Launch + 2 Hydros Sole units
      • For AWC — are the built in dosers on the X10 suitable for a ~42.5g system? I know it’s *possible* but is it an actual good option worth spending $800 on for the X10? Would the Launch with two Sole’s be a better option for only a few bucks more?
    • Various Hydros sensors (Temp, skimmer level, leak sensor, etc.
    • Hydros ATO pump + Triple Optical Sensor
    • Hydros Fish Feeder
  • Water Storage
  • Lighting:
    • Either AI Prime 16 or Kessil A360XE, depending on budget once I get done with the buying the other main items.
    • UNS Refugium light
  • Heater:
    • BRS 200w Titanium Heater
  • Return Pump:
    • Sicce SDC 3.0
  • Wave/Flow Pumps
    • Undecided here, have previous experience with MP10s so thinking that potentially but the Hydros Wave Engine setup is also enticing.

Thanks a bunch for any thoughts/feedback you can provide!
 
A very good idea to do this with your son - and it will probably take until he's to two get the tank up and running as you want:). If I were you I would keep it simple for now - You can top off your own water, and do testing to determine most of the things that need testing. I would set up the tank - and add the more expensive 'non-essential' things as time goes on - unless you're really geared up to start in this hobby? This is heresy - but if you're going to get a controller - I think you're picking the right brand. Make sure to let everyone know how its going - as its going - with a build thread post here on R2R
 
Last edited:
Hi there — my wife and I had our first child last year and I’m thinking of getting back into the hobby as it will be something to do with him as he grows up, as I remember how how much I loved going to aquariums when I was little and I think this is the case for most kids. One big requirement for me to get a tank up and running again will be automation due to limited time and desire to maintain things manually and so would like to ask for some advice on my current planned build list — main question is around Hydros/AWC feasibility, but definitely open to any other reccos. Here’s what I have so far:​
  • Tank: UNS R60
  • Controller:
    • Hydros X10 + XP8 or Hydros Launch + 2 Hydros Sole units
      • For AWC — are the built in dosers on the X10 suitable for a ~42.5g system? I know it’s *possible* but is it an actual good option worth spending $800 on for the X10? Would the Launch with two Sole’s be a better option for only a few bucks more?
    • Various Hydros sensors (Temp, skimmer level, leak sensor, etc.
    • Hydros ATO pump + Triple Optical Sensor
    • Hydros Fish Feeder
  • Water Storage
  • Lighting:
    • Either AI Prime 16 or Kessil A360XE, depending on budget once I get done with the buying the other main items.
    • UNS Refugium light
  • Heater:
    • BRS 200w Titanium Heater
  • Return Pump:
    • Sicce SDC 3.0
  • Wave/Flow Pumps
    • Undecided here, have previous experience with MP10s so thinking that potentially but the Hydros Wave Engine setup is also enticing.

Thanks a bunch for any thoughts/feedback you can provide!
PS - I spoke too soon - with a new baby - some more of the automation - if its in your budget (that you mentioned) - may be helpful!!
 
Hi there — my wife and I had our first child last year and I’m thinking of getting back into the hobby as it will be something to do with him as he grows up, as I remember how how much I loved going to aquariums when I was little and I think this is the case for most kids. One big requirement for me to get a tank up and running again will be automation due to limited time and desire to maintain things manually and so would like to ask for some advice on my current planned build list — main question is around Hydros/AWC feasibility, but definitely open to any other reccos. Here’s what I have so far:​
  • Tank: UNS R60
  • Controller:
    • Hydros X10 + XP8 or Hydros Launch + 2 Hydros Sole units
      • For AWC — are the built in dosers on the X10 suitable for a ~42.5g system? I know it’s *possible* but is it an actual good option worth spending $800 on for the X10? Would the Launch with two Sole’s be a better option for only a few bucks more?
    • Various Hydros sensors (Temp, skimmer level, leak sensor, etc.
    • Hydros ATO pump + Triple Optical Sensor
    • Hydros Fish Feeder
  • Water Storage
  • Lighting:
    • Either AI Prime 16 or Kessil A360XE, depending on budget once I get done with the buying the other main items.
    • UNS Refugium light
  • Heater:
    • BRS 200w Titanium Heater
  • Return Pump:
    • Sicce SDC 3.0
  • Wave/Flow Pumps
    • Undecided here, have previous experience with MP10s so thinking that potentially but the Hydros Wave Engine setup is also enticing.

Thanks a bunch for any thoughts/feedback you can provide!
Congrats I have the same uns r60. A few notes

I use the hydros launch, it's perfect for this tank

I use a kamoer 4 head dozer, again, perfect for the sump prepared 4 inputs

Lighting - I originally went with an radion xr15, but I ended up adding an AI Blade 21" to increase the spectrum and improve the light angles /spread
20250505_221440.jpg
20250505_221505.jpg
20250505_221708.jpg


200 watt Heater is fine, I use a 100 without issue

I use the sicce pump as well but I went with the 6.0 and I run it at 72%. Im not sure if the 3.0 is enough with the head height (more is better scenario for me)

I am using an mp10, vortex random flow generators (4 total) and a gyre 330 to create a purely random flow pattern. I have 7 torches, tons of zoas, gorgonians, etc
20250505_221357.jpg


Uns gave me the refugium add on, you might be able to get it in your package as well.

By the way, their customer service is out of this world. I use IG to communicate with Brandon and others and they always quickly respond and provide excellent information and directions.

Let me know if you have any questions!

Greg
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 4.2%
  • I decorate AROUND the tank or stand

    Votes: 4 16.7%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 15 62.5%
  • We don’t decorate for the holidays

    Votes: 4 16.7%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new