Changing out the Wet Side of a Vortex pump

[Wy Renegade]

Don't have one of these myself, but a friend has asked me to help them out with theres. Anybody have any pointers for me? Thanks in advance.

 

[notxes11]

The magnet inside is crazy strong! I made the mistake of putting it down in the sink. Took me forever to pry that thing off! THe back cap on the setside is a twist and pull. Don't pry it or you'll snap the plastic holds. Pretty easy though. GL

 

[Wy Renegade]

The magnet inside is crazy strong! I made the mistake of putting it down in the sink. Took me forever to pry that thing off! THe back cap on the setside is a twist and pull. Don't pry it or you'll snap the plastic holds. Pretty easy though. GL

Thanks for the help! BTW, welcome to R2R ~ we're sure getting a lot of Colorado people here lately, have we got somebody there recruiting for us?

 

[swannyson7]

Are they swapping it out or rebuilding it? If rebuilding it, videos can be found on Youtube to show disassembly instructions.

 

[Wy Renegade]

Hhhhmmm, not sure. She said the wetside was dissassembled and couldn't be reassembled, so she had to order the internal portion for the wetside. Like I said, I don't have one of these, so can't say for sure. I'll check U-tube as well. Thanks

 

[Murfman]

Thanks for the help! BTW, welcome to R2R ~ we're sure getting a lot of Colorado people here lately, have we got somebody there recruiting for us?

Yep ;-)

 

[Wy Renegade]

Yep ;-)

Thanks Paul! Awesome that you're recruiting.

 

[skinz78]

You DA MAN Paul!

It is extremely easy, the hardest part is getting the cover off...

 

[Wy Renegade]

Alrighty then, may give it a shot this evening. Will let you all know how it went.

 

[bige]

The only trouble with re-assembly is making sure the propeller is seated properly. None of it is all that complicated.

 

[CJO]

I take my wetside apart fully to clean it and never had much of a problem. You twist the shield from the bottom to take it off. I'm pretty sure that the propellor just pulls off (it's been a while and I don't have the best memory). Then, you just push in the tabs and pry the base apart.

CJ