Combined GFO & CARBON

AtlanticGail

Community Member
View Badges
Joined
Oct 18, 2023
Messages
92
Reaction score
24
Location
Canada
What state or country do you live in
Canada
Rating - 0%
0   0   0
Anyone combine GFO & CARBON in media reactor, is it better results than just with GFO alone?
 
Anyone combine GFO & CARBON in media reactor, is it better results than just with GFO alone?

It's common to do so. The main advantage is that if you mix it well, you don't have to worry about tumbling the GFO. The main drawback is that you are going to waste media because you're going to have to change out one before the other is depleted. When I ran GFO I always mixed with carbon so I didn't have to worry about tumbling. The media serve two separate purposes, so it won't give you better results per se. You'll just be getting the water clarity of the carbon and the phosphate reduction of the GFO based on the quantities of each that you use.
 
It's common to do so. The main advantage is that if you mix it well, you don't have to worry about tumbling the GFO. The main drawback is that you are going to waste media because you're going to have to change out one before the other is depleted. When I ran GFO I always mixed with carbon so I didn't have to worry about tumbling. The media serve two separate purposes, so it won't give you better results per se. You'll just be getting the water clarity of the carbon and the phosphate reduction of the GFO based on the quantities of each that you use.
Did you place it between two sponges in media reactor?
 
Did you place it between two sponges in media reactor?

Yes, I mix the go and carbon well then place a sponge under it and over it holding it all together tightly. If you mix the two you don’t want it to tumble at all because the carbon will grind the gfo to dust.
 
It's common to do so. The main advantage is that if you mix it well, you don't have to worry about tumbling the GFO. The main drawback is that you are going to waste media because you're going to have to change out one before the other is depleted. When I ran GFO I always mixed with carbon so I didn't have to worry about tumbling. The media serve two separate purposes, so it won't give you better results per se. You'll just be getting the water clarity of the carbon and the phosphate reduction of the GFO based on the quantities of each that you use.
Did you increase your flow compared just flow with GFO alone just tumbllng
 

TOP 10 Trending Threads

WHICH TYPE OF MISTAKE TAUGHT YOU YOUR MOST EXPENSIVE REEFKEEPING LESSON?

  • Moving too quickly or adding too much at once

    Votes: 7 36.8%
  • Skipping—or shortening—quarantine or dipping

    Votes: 5 26.3%
  • Buying the wrong equipment the first time

    Votes: 4 21.1%
  • Ignoring maintenance, warning signs, or redundancy

    Votes: 6 31.6%
  • Chasing numbers or making too many changes

    Votes: 3 15.8%
  • Choosing incompatible fish, corals, or invertebrates

    Votes: 3 15.8%
  • Poor aquascaping or tank-design decisions

    Votes: 1 5.3%
  • Failing to research an animal’s needs

    Votes: 1 5.3%
  • Trusting bad advice

    Votes: 3 15.8%
  • Doing something on the tank when you should've gone to bed

    Votes: 4 21.1%
  • Something else—tell us below

    Votes: 3 15.8%
  • I’m still waiting for my first expensive lesson!

    Votes: 2 10.5%
Back
Top
Home
Post thread…
Market
What's new