Combined GFO & CARBON

AtlanticGail

Community Member
View Badges
Joined
Oct 18, 2023
Messages
92
Reaction score
23
Location
Canada
What state or country do you live in
Canada
Rating - 0%
0   0   0
Anyone combine GFO & CARBON in media reactor, is it better results than just with GFO alone?
 
Anyone combine GFO & CARBON in media reactor, is it better results than just with GFO alone?

It's common to do so. The main advantage is that if you mix it well, you don't have to worry about tumbling the GFO. The main drawback is that you are going to waste media because you're going to have to change out one before the other is depleted. When I ran GFO I always mixed with carbon so I didn't have to worry about tumbling. The media serve two separate purposes, so it won't give you better results per se. You'll just be getting the water clarity of the carbon and the phosphate reduction of the GFO based on the quantities of each that you use.
 
It's common to do so. The main advantage is that if you mix it well, you don't have to worry about tumbling the GFO. The main drawback is that you are going to waste media because you're going to have to change out one before the other is depleted. When I ran GFO I always mixed with carbon so I didn't have to worry about tumbling. The media serve two separate purposes, so it won't give you better results per se. You'll just be getting the water clarity of the carbon and the phosphate reduction of the GFO based on the quantities of each that you use.
Did you place it between two sponges in media reactor?
 
Did you place it between two sponges in media reactor?

Yes, I mix the go and carbon well then place a sponge under it and over it holding it all together tightly. If you mix the two you don’t want it to tumble at all because the carbon will grind the gfo to dust.
 
It's common to do so. The main advantage is that if you mix it well, you don't have to worry about tumbling the GFO. The main drawback is that you are going to waste media because you're going to have to change out one before the other is depleted. When I ran GFO I always mixed with carbon so I didn't have to worry about tumbling. The media serve two separate purposes, so it won't give you better results per se. You'll just be getting the water clarity of the carbon and the phosphate reduction of the GFO based on the quantities of each that you use.
Did you increase your flow compared just flow with GFO alone just tumbllng
 

HOW MUCH DOES A FISH’S FEEDING REQUIREMENTS AFFECT YOUR STOCKING DECISIONS?

  • A lot! - I avoid fish that require frequent or specialized feeding

    Votes: 11 27.5%
  • Quite a bit, but an automatic feeder can change my answer

    Votes: 6 15.0%
  • It depends on whether my nutrient export can handle it

    Votes: 6 15.0%
  • It depends on how badly I want the fish

    Votes: 10 25.0%
  • Not much. I’m willing to adjust my routine

    Votes: 9 22.5%
  • Not at all. Feeding demands don’t limit my stocking choices

    Votes: 7 17.5%
  • I usually learn about the demanding feeding schedule after buying the fish!

    Votes: 2 5.0%
  • I haven’t really considered this before

    Votes: 3 7.5%
  • Something else (see my comments in the thread)

    Votes: 1 2.5%
Back
Top
Home
Post thread…
Market
What's new