Confused with neptune wav and ups programing.

[Dburr1014]

What I'm trying to do is in a power outage have only my right wav turn on pulse mode at 1%.
I have my EB832 on a ups and all other outlets shut off. I also have the head unit plugged in to a 12 volt so it will detect the outage.
This is what I have ;
First shot is the wav, second is a virtual outlet, and the last is a profile for the wav.
How do I put all this together?
Or maybe I'm doing all this wrong?
I went thru power consumption and other tutorials couldn't find anything to do with this.
Thanks

 

[SuncrestReef]

You’re close, but the syntax isn’t correct:

If Output Power_outage = ON Then Power_fail

Refer to my Apex Command Reference for the acceptable syntax for each command:
https://www.reef2reef.com/ams/apex-programming-command-reference.771/

 

[Dburr1014]

If Output Power_outage = ON Then Power_fail

Should it be
If output power_outage = on then power_fail on
?

 

[SuncrestReef]

Should it be
If output power_outage = on then power_fail on
?

No. As noted in my article I linked above, the proper syntax for the If Output command is:

If Output Output_Name = [ON/OFF] Then [ON/OFF/Profile_Name/%]

In other words, after the "Then" portion of the command, you can only specify one of these options:

• ON
• OFF
• A Profile name
• A percentage value

Just use the exact wording I provided in my previous reply:

If Output Power_outage = ON Then Power_fail

 

[Dburr1014]

Okay, thanks

 

[Dburr1014]

Hmmm, still can't get it to work...

 

[Dburr1014]

After making a profile for the wav am I suppose to do something with it? Like activate it somehow?
I'm confused.

 

[Dburr1014]

I had to do it this way too get anything to accept when power goes out. It's not a pulse as I wanted but it is something.