Just the ones your using ..I only use three !!
You auto dose mag?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Just the ones your using ..I only use three !!
YesAlso, best to run the system with the solution then calibrate? I see people has RO water to calibrate but then water is in the line unless they run it out? I don’t know. What’s the best option ?
You need too work out what Your daily uptake is ..
so test after 7 days and see how Much is used ,devide by 7 , then devide one day into 24 dosing .. but the coral box works that out you just need To know Total per day then how Many times you want it To dose ,
Im dosing Calc and mag and alk 17 ml per day on my 90g mixed reef
Make sure all the hoses are pushed on as far as they can ... I’m sure they are .. but thought I’d mention it , the beter the seal the less likely to get air bubbles in !Here it is!
And I just can’t quite see properly but make sure your doser is higher than the outlets ..
This is the outlet ends on mine with check valves
( the long one is my ATO )
The check valves are to stop a back syphon and intake of air ...And what’s the purpose of check valves? I read none if they are not submerged
The check valves are to stop a back syphon and intake of air ...
If you alk hose is in the water any residue alk will crystallize and it will become blocked .. I tried it once with my mag hose .. but didn’t seem to make any difference
My outlet ends are above water never submerged. Also reef breeders said air in the outlet lines is completely fine and won’t make much of a difference is what I read
@Reef Breeders
Im setting up my doser i ordered from you guys! I know i need to keep the dosing container below the water level but is it ok to have the pump itself above the water? I have an AIO Tank without a sump. I want to put the container on the bottom of the stand but hang the doser at the top of the stand with the output lines going out the back and up to the rear of the tank. Is that ok?