DIY Diatom Filter for under $100.00

  • Thread starter Thread starter Paul B
  • Start date Start date
  • Tagged users Tagged users None
Got mine built and plan on running it this weekend. Best way to run it- set it up and let it go or stir the sand /blow off the rocks then run it?

IMG_0261.jpeg
 
I always put a rigid plastic tube on the output hose and stir everything up. Then let it run and do it again.
I don't know how anyone keeps a tank long term without one of these.
 
Few questions for the people that built one.
Do you have a link to the canister. Not sure if I'm finding the correct one.
Would a 1 micro filter work well without the diatom powder?
How often are you guys running it.
Thanks
 
I have a link someplace, I will have to look for it. I run it with a 5 micron cartridge with no powder. Works perfectly
 
I use the 1 micron marineland filters without diatomaceous earth . They clog quickly . And have to be cleaned within 2 days . Using the DE would probably allow u to clean the membrane less where most of the detritus will be trapped by the DE . Once you turn the pump off all that DE/ detritus will fall off and you could recharge with a fresh supply of DE
 
Sorry I am not good at inserting links will have to learn . All on Amazon Housing Geek Pure 127-10 10inch by 2.5 with bleed on top $38 Canadian . Filters Aquaboon 10 by 2.5 5 micron filters pack of 5 $38 817905020473 . O rings ( the housing comes with 3 Meccanixity $16 for 5 BOBFJDCXHL
 
I use the 1 micron marineland filters without diatomaceous earth . They clog quickly . And have to be cleaned within 2 days . Using the DE would probably allow u to clean the membrane less where most of the detritus will be trapped by the DE . Once you turn the pump off all that DE/ detritus will fall off and you could recharge with a fresh supply of DE
There is a source for marineland equivalent cheaper and They seem the same quality I use them now. Personally to afraid to clean them
 
Sorry I am not good at inserting links will have to learn . All on Amazon Housing Geek Pure 127-10 10inch by 2.5 with bleed on top $38 Canadian . Filters Aquaboon 10 by 2.5 5 micron filters pack of 5 $38 817905020473 . O rings ( the housing comes with 3 Meccanixity $16 for 5 BOBFJDCXHL
Thank you
 
There is a source for marineland equivalent
I never thought of looking for other mfgs. If you know of a link , I would like to know .

No issue in cleaning . Use cheap Home Depot chlorine . That way there is no additives to the chlorine . Rinse with water afterwards . Follow with a soak in vinegar followed by another rinse . Good to go . Only issue is if you leave the filters in too long , the rubber ends starts to degrade
 
I never thought of looking for other mfgs. If you know of a link , I would like to know .

No issue in cleaning . Use cheap Home Depot chlorine . That way there is no additives to the chlorine . Rinse with water afterwards . Follow with a soak in vinegar followed by another rinse . Good to go . Only issue is if you leave the filters in too long , the rubber ends starts to degrade
So no good at getting links on to the site this should do. Amazon " Titled " 4 Pack Filter Cartridges Compatible with Marineland Magnum ML90770 filters. Havansidy is the brand / manufacturer . Model # is LTGL-001
 
Big thanks to @Paul B for the idea just got this built we’ll see how she works tomorrow. Thanks again 😁
 

Attachments

  • IMG_3706.jpeg
    IMG_3706.jpeg
    122.7 KB · Views: 69
For the 10" version, what pump size have people been using :) ?
 
It looks pretty good. If you are using the 5 micron cartridge, you don't need diatom powder. You can't backflush this. You need to open it and dump it out, then brush off the cartridge. When it gets very dirty, add a little bleach and let it sit for an hour. It comes brand new.

Fill it to the top before you run it. It's easier if you have the air valve on top but I can't see if yours has that, if not, it is hard to purge the air.
 
Evil1 The patent for the Vortex Diatom filter ran out decades ago. I have been using them since the 60s.

This model I am making is supposed to have the motor mounted on top of the filter housing. There are a few things to work out first but in either case, I want it to work very well and be easy to clean before I make the final model.

The problem with the pump on the top is that the slightest amount of air in it stops it. That was one big problem with the Vortex model. This is fun and I will perfect the thing. I just need a little time. Remember I put this together in less than an hour. :)

Steve, I do carry everything over to the sink. Only the hoses need to go in the sink, not the entire filter and the outside of the unit doesn't get wet.
Hi so are you making a diatom earth filter? I am looking for one for my 97 gallon aquarium. I used to have a vortex diatom earth filter. Looking to get another one.
 
I made a couple for myself and they don't need diatom powder because I use a 5 micron filter. I do not sell them
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 26 23.0%
  • I’d trust someone who knows my tank to choose

    Votes: 10 8.8%
  • I’d rather get a gift card and pick it myself

    Votes: 45 39.8%
  • I’d prefer gear or supplies instead

    Votes: 3 2.7%
  • Please don’t surprise me with livestock

    Votes: 29 25.7%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new