Hi guys, just to put it out if anyone need it. Not myp roject but i made one and is actually pretty impressive.
I had a jebao 3.4 but for a 10g nano it was not enough precise. I found this project ( https://www.joy-reef.com/en/dosing-pump-diy-part-1-hardware/ ) and made a 3 head doser for 30€ with 1*3mm hose and now is super precise.
Is a wifi pump with free web interface that is really well done. In the tutorial there is all the part list needed and it can go from 30€ for a 3 head up (it all depend on the head you buy), i've used kamoer NKP for like 6€ a piece and to me is enough.
Project is actually used a lot in italy and could not find bad review about it so i did it too...
If you do it, remember to tip the designer if you find it usefull.
I had a jebao 3.4 but for a 10g nano it was not enough precise. I found this project ( https://www.joy-reef.com/en/dosing-pump-diy-part-1-hardware/ ) and made a 3 head doser for 30€ with 1*3mm hose and now is super precise.
Is a wifi pump with free web interface that is really well done. In the tutorial there is all the part list needed and it can go from 30€ for a 3 head up (it all depend on the head you buy), i've used kamoer NKP for like 6€ a piece and to me is enough.
Project is actually used a lot in italy and could not find bad review about it so i did it too...
If you do it, remember to tip the designer if you find it usefull.