as you wrote, I understand that LDDs only work with colors above 3V and yellow has 2V, correct?! then you said they work with LDD-LW(this one probably work below 3V) so can i mix LDD with LDD-LW? Do you have plates ready with this mixture?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You can run 2 to 3 off one ldd and 48 (44 effective) volt power supply.Another question... If each LDD is for a color channel... If I buy other Pucks of Leds, can I connect them to the same LDD? or will i have to buy 8 LDDs for each puck?
Why 250w ? If 4 unit puck X 69w = 296You can run 2 to 3 off one ldd and 48 (44 effective) volt power supply.
13 v * 3 = 39 volts.
To run 4 you need 52v plus 4= 56 v power supply. About 250 watts(roughly calculated).
One ldd per channel.
You need ldd-h's though for that high of voltage.
The "A" or "AB" version is adj to 56v
50-57volts
As I wrote above and per Meanwell ldd-L and ldd-h spec sheet it did state 2 volt channel was ok
They aren't 69 watts each.Why 250w ? If 4 unit puck X 69w = 296
Too no understanded 13v × 3= 39. Volts what is 13v? Why X 3?
What is Pro and Con tô put driver?They aren't 69 watts each.
Watts = Volts x Amps.
13 volt string
4 deep blue diodes in series
3.25 volts each
+3.25...+3.25....+3.25.....+3.25....
13 * .7 = 9.1 watts
Do that for every channel
4 are 9.1w = 36.40
4.4 * .7 = 3.08
6.4 * .7 = 4.48
2.2 * .7 = 1.54
6.6 * .7 = 4.62
50.12 watts not 69 watts
200.48 watts for 4
Less if you use recommended 500 or 350 mA drivers for violet and UV.
69 used like peak current....1000 mA
Very good explanationThey aren't 69 watts each.
Watts = Volts x Amps.
13 volt string
4 deep blue diodes in series
3.25 volts each
+3.25...+3.25....+3.25.....+3.25....
13 * .7 = 9.1 watts
Do that for every channel
4 are 9.1w = 36.40
4.4 * .7 = 3.08
6.4 * .7 = 4.48
2.2 * .7 = 1.54
6.6 * .7 = 4.62
50.12 watts not 69 watts
200.48 watts for 4
Less if you use recommended 500 or 350 mA drivers for violet and UV.
69 used like peak current....1000 mA
What is Pro and Con tô put driver?
350... 500 no understand
Less par of light ?! Cors mix?!
R$ 303,99 10%de desconto | Mean well-fonte de alimentação, 240w, 54v, a, ip67, corrente e tensão, ajustável, 2 peçasYou can run 2 to 3 off one ldd and 48 (44 effective) volt power supply.
13 v * 3 = 39 volts.
To run 4 you need 52v plus 4= 56 v power supply. About 250 watts(roughly calculated).
One ldd per channel.
You need ldd-h's though for that high of voltage.
The "A" or "AB" version is adj to 56v
50-57volts
As I wrote above and per Meanwell ldd-L and ldd-h spec sheet it did state 2 volt channel was ok
What do to pass less current? And it light upUV and violet diodes are less efficient than other colors.
Less current means less heat means longer life.
Less current, less light yes. Still lights.What do to pass less current? And it light up
R$ 303,99 10%de desconto | Mean well-fonte de alimentação, 240w, 54v, a, ip67, corrente e tensão, ajustável, 2 peças
The ldds H what number? Tô 4 pucks? No understand this numbers.. ldds300 ldd 500 ldd700...
R$ 303,99 10%de desconto | Mean well-fonte de alimentação, 240w, 54v, a, ip67, corrente e tensão, ajustável, 2 peças
The ldds H what number? Tô 4 pucks? No understand this numbers.. ldds300 ldd 500 ldd700...
In aliexpress have not Ldd HW
I am from Brazil. I think so can buy ebay.Too bad. Do you have ebay?
Where are you?
You could use these but you would need. 28- 32 of them.
You would need to know how to measure the current and adjust accordingly.
Change back to 24v power supply.