Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Most likely can replace w/ 3W Epileds or any "egg" type diode.I too would like to know this. I have a pair of OR2's where a bunch of the LED's are burnt out, and the whole string is a brick now.
I'm highly likely to just buy a pile of epiled's and do a wholesale swap. I took mine apart, and they look like std 3W/1W chips, can't tell what brand or wattage... The wattage and voltage don't make any sense to me:
36 LED's. 60W driver. ~75VDC voltage coming off the driver.. So in theory they are getting 1.4W each? The voltage makes no sense either..
OR 120: Input : Voltage:100V-240V AC .
Output : Voltage :35V-65V DC . Current :1A
Power Consumption: 65W+/_5%
did you end up replacing the chips if so can you let me know what you went with? like you i have a entire or2 with blown bulbs =/I too would like to know this. I have a pair of OR2's where a bunch of the LED's are burnt out, and the whole string is a brick now.
I'm highly likely to just buy a pile of epiled's and do a wholesale swap. I took mine apart, and they look like std 3W/1W chips, can't tell what brand or wattage... The wattage and voltage don't make any sense to me:
36 LED's. 60W driver. ~75VDC voltage coming off the driver.. So in theory they are getting 1.4W each? The voltage makes no sense either..
I posted a whole writeup with pics in the DIY forum on this, how to do it, lots of pics. I ended up swapping every LED.did you end up replacing the chips if so can you let me know what you went with? like you i have a entire or2 with blown bulbs =/
thank you very much man awesome !I posted a whole writeup with pics in the DIY forum on this, how to do it, lots of pics. I ended up swapping every LED.
I used these:
3W watts High Power SMD LED COB Chip Lights Beads White Red Blue Yellow With PCB | eBay
3W High Power LED. 3W Cold White 30000-35000k 3.2-3.4V 700mA 260-280LM. Lumious Flux (lm). SMD Pre-Wired LED. High Power LED. LED Mix Kits. Through Hole LED. DIP Pre-Wired LED.www.ebay.com
( I picked the non-PCB ones)
RapidledWhen leds came out and were only blues and whites. Diy custom was all the rage. Ppl made led lights before spending the $300 on a light. Cant remember the name of the led site. Sorry. I agree you can swap out the 3w leds with prob any bridgelux or cree 3w leds.
D