If the 2.2 maxi stand alone utilizes it’s own port for level sensors once set as a slave to the P4 will that level sensor still work and be able to dictate how a pump will dose ??
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Agree - you paid for the hardware - would be nice if it wasn't disabled and worked on the PAB chain.Yup. I get all that. Still sucks.
How many level sensors do you use with your p4? With two dividers - a P4 can use 4 sensors and you can always use an extension card to add 4 more sensors. These senors can be used for regulation of the slave pumps you have connected to the P4. I use a Maxi 2.2 slave for my top off. I have switch socket to react on the sensor in level 1 function.
My dose program 21 is a Maxi 2.2 slave head and react on switch 5. When you use a Maxi 2.2 as top off pump you do not even need a physical switch - you can use a "virtual" (a switch channel without a physical socket)
Sincerely Lasse
YesJust set up the switch channel to be triggered by the float switch and have the switch channel trigger the maxi 2.2 ?