Dosing Copper Power

[Colbyblake_]

So earlier this week my Achilles tang started showing signs of ich and then I noticed a couple spots on his fins and body. So I obviously set up a quarantine tank and moved all my fish into late last night. Going to start copper power today but not sure how much I should dose and how many days I should ramp the dosage up… it’s a 40 breeder with two hob filters and a couple rocks that I had in my sump so the qt would be instantly cycled. Just need to know what y’all think. The Achilles and other tangs are still eating, swimming normally, and breathing normally. Thanks!
-Colby

 

[vetteguy53081]

So earlier this week my Achilles tang started showing signs of ich and then I noticed a couple spots on his fins and body. So I obviously set up a quarantine tank and moved all my fish into late last night. Going to start copper power today but not sure how much I should dose and how many days I should ramp the dosage up… it’s a 40 breeder with two hob filters and a couple rocks that I had in my sump so the qt would be instantly cycled. Just need to know what y’all think. The Achilles and other tangs are still eating, swimming normally, and breathing normally. Thanks!
-Colby

Therapeutic level is 2.25-2.5 for a full 30 days at 80.5 degrees . Leave the display tank fishless for 45-60 days at 81 degrees
To determine your therapeutic level, you will need to monitor readings with a reliable copper test kit and no api brand either

 

[LeftyReefer]

Since your fish already have spots and could be in distress, no sense in a slow ramp up.

I'd go ahead a dose full strength right off the bat, or over a single day at the most.

To get to 2.5 PPM with copper power it takes about 1.5 ML per gallon.

So;
1.5 ML per gallon
3 ML per 2 gallons
30ML per 20 gallons
60 ML per 40 gallons

will get you pretty close to 2.5ppm.
Hanna copper checker works great.

 

[nereefpat]

Ratios for Dosing Copper Power

I have recently been getting a few requests for how to adjust dosing with all of my research on the hanna checker and copper power being used together. Figured I would throw this up as a point of reference. For anyone using Copper Power: Bottle concentration will bring you to a Cu level of...

www.reef2reef.com

 

[LeftyReefer]

As noted above. Its actually 1.48ml per gallon, but I just round it to 1.5ml to make things easier.

The Hanna copper checker is definitely worth having when QTing fish with copper.

 

[mindme]

Save yourself some money and just buy the hannah tester from the start.

Or be like me and waste money on 2 other tests that you can't read the results on.

 

[Colbyblake_]

Save yourself some money and just buy the hannah tester from the start.

Or be like me and waste money on 2 other tests that you can't read the results on.

I have the Hanna checker, in the past, I wasted so much money of test kits that did absolutely nothing hahaha

 

[jmichaelh7]

Therapeutic level is 2.25-2.5 for a full 30 days at 80.5 degrees . Leavevtge display tank fishless for 45-69 days at 81 degrees
To determine your therapeutic level, you will need to monitor readings with a reliable copper test kit and no api brand either

Is therapeutic level 2.25 - 2.5

 

[vetteguy53081]

Is therapeutic level 2.25 - 2.5

Yes- therapeutic treatment range

 

[Joj]

I use this calculator and it helps tremendously. Just have to sometimes convert mL to once since I'm dosing a large volume on my end.

I personally ramp up to 1.75 or 2.0 ppm right away within a day with 2-3 doses spread apart and then up to 2.25 the next few days.

I have also dropped in fishes into copper with ot was already 2.0 to 2.25 with no ill effects either.

Copper Power Calculator | CALCONIC_ Calculator

Custom Copper Power Calculator calculator, built using CALCONIC_

www.calconic.com