My tank location is sitting over basement iron beam and floor joists. I cannot go through the wall sit it sit right over the beam and due to some other basement pipes, I have to come out at least 12 inches from the wall. I have decided to run the pipes through the bottom of my cabinet. I am going to cut the hole in the bottom of my cabinet and through the floor the same size as a a floor vent in case I move the tank and don't want to immediately replace the wood slat.
The space directly under the tank is a wide open area. I was thinking about running pipe to the sidewall in the basement but that adds another 90" bend just a few inches from another bend. I will see if that causes any issues and if it does, I will just run the sump straight under the tank.
Need some ideas. What is available for vertical pipe support which also allows to adjusting the distance from the pipe to a wall. I found these: Stainless Steel Wall Mount Ceiling Mount Pipe Supports
Thanks,
Bob
The space directly under the tank is a wide open area. I was thinking about running pipe to the sidewall in the basement but that adds another 90" bend just a few inches from another bend. I will see if that causes any issues and if it does, I will just run the sump straight under the tank.
Need some ideas. What is available for vertical pipe support which also allows to adjusting the distance from the pipe to a wall. I found these: Stainless Steel Wall Mount Ceiling Mount Pipe Supports
Thanks,
Bob