First Hydros controller officially installed permanently!
For those with OCD currently dying, I apologize. The white wire will be tucked away beside the XP8 and likely plugged in with a Reed door switch eventually.
TLDR below: Wiring plan mostly for next Saturday hopefully
The rest of the wires will be moved elsewhere when the hooks we ordered arrive and I get the rest of the Hydros "board" installed on the left wall next to the XP8. We decided trying to get everything shoved into an 8" x 24" spot might be very difficult and would leave no room for future unplanned expansions. Now it's all going on a 30" x 16" hanging wall instead.
Once the hooks are here, I'll install the wall and then start relocating all of the wiring so I can unplug everything once and plug it all back in where it belongs.
Heaters/Inkbird controller on the XP8 for a third layer of heater failure protection.
Power heads on XP8.
Return pump on XP8.
Plank and Sicce on XP8.
R2R light either on XP8 or Smart plug on one of the other strips.
Gyre on WaveEngine on power strip with lights likely.
Lights are all WiFi controlled so they'll be on their own power strip.
ATO on Hydros Wifi strip.
Doser, Betta Tanks, and UV can be anywhere - likely Hydros Wifi strip.