Everything Noopsyche Controller

[Ruben's Reef]

I have my controller on the cabinet unplugged. If I need to use it then I plug it in and after the use unplugged and back to the cabinet. You don’t need to have it plugged all time.

 

[Joeype]

Can anyone help explain how I get the clock to keep time on the remote? The time on my remote never moves?? I transmit my lighting schedule and everything else but the time NEVER moves forward??? Thanks

 

[Ruben's Reef]

Ok, just plug the remote to charge. Then, make sure the T is highlighted and then press the center of the dial and will the hour and then you can move the dial either way and will change the time.

 

[Ruben's Reef]

When you finish setting the time then it will keep on that time. You don’t have to do nothing else. .

 

[Joeype]

Thank you, I've tried this probably 50 times and still nothing :(

 

[Manose]

Thank you, I've tried this probably 50 times and still nothing :(

So the time on the front never changes when plugged in?

 

[Joeype]

correct

 

[Manose]

correct

Send me a private message and I will get it taken care of for you.

 

[leepink23]

How many of these are recommended over a 4 foot frag tank?

 

[Manose]

How many of these are recommended over a 4 foot frag tank?

how wide 24in? If so 2 would be plenty

 

[leepink23]

how wide 24in? If so 2 would be plenty

Yes 24 inches. Thanks!

 

[User]

hi guys

quick question- My remote has an "F" channel "on/off" when i go into the programming in order to set custom ramps

Im guessing this lets you omit/add that particular time point to the F program Demo, so that you dont waste a bunch of the demo on the overnight 'all off' section.

Is that correct?
thanks

 

[Manose]

hi guys

quick question- My remote has an "F" channel "on/off" when i go into the programming in order to set custom ramps

Im guessing this lets you omit/add that particular time point to the F program Demo, so that you dont waste a bunch of the demo on the overnight 'all off' section.

Is that correct?
thanks

F channel is for the hybrid lights to cut on or off.

 

[cvrle1]

Few quick questions about controller. I will start playing with it soon, but want to make sure I understand.

M (Manual mode) means that I can set 5 channels at what ever intensity, and lights will be using that setting 24/7, no ramp up/ramp down and so on. Correct?

If above is correct, when do lights turn on and off in manual mode? There is no setting for that.

SPS, LPS and SPS/LPS modes are just 3 names used. There is absolutely no difference in spectrum etc between the 3. If I use exact same time and power settings between SPS and LPS modes for example, I will get identical results. Correct?

Based on the answers to these, I may have few more questions haha

Thanks

 

[Manose]

Few quick questions about controller. I will start playing with it soon, but want to make sure I understand.

M (Manual mode) means that I can set 5 channels at what ever intensity, and lights will be using that setting 24/7, no ramp up/ramp down and so on. Correct?

If above is correct, when do lights turn on and off in manual mode? There is no setting for that.

SPS, LPS and SPS/LPS modes are just 3 names used. There is absolutely no difference in spectrum etc between the 3. If I use exact same time and power settings between SPS and LPS modes for example, I will get identical results. Correct?

Based on the answers to these, I may have few more questions haha

Thanks

That is a yes to everything :)
Manual mode will not nut off unless at zero percent or the power is cut off.

 

[cvrle1]

That is a yes to everything :)
Manual mode will not nut off unless at zero percent or the power is cut off.

Thank you sir. And your Freudian slip gave me a great laugh (nut off) :P

 

[Manose]

Thank you sir. And your Freudian slip gave me a great laugh (nut off) :p

OMG I need to read before posting

 

[User]

I soooooooooo wish the controller had a literal off/on button.

I’m going to have to either duck down into the back of the cabinet and pull the plug, or get a ladder to reach up and turn off the power strip.

Or get a $12 remote switch. That would work.

Ignore me- you didn’t need to be here for any of that, apparently

 

[cvrle1]

I soooooooooo wish the controller had a literal off/on button.

I’m going to have to either duck down into the back of the cabinet and pull the plug, or get a ladder to reach up and turn off the power strip.

Or get a $12 remote switch. That would work.

Ignore me- you didn’t need to be here for any of that, apparently

Yeah that remote. I actually just found out today that it is useless if it is not plugged in al l the time. I plugged it in a week ago, it charged, and I disconnected it thinking battery is full. Tried to turn it on today, no dice. Then I read that there is really no battery inside, or it is good for like an hour maybe ;Bored

 

[User]

Yeah that remote. I actually just found out today that it is useless if it is not plugged in al l the time. I plugged it in a week ago, it charged, and I disconnected it thinking battery is full. Tried to turn it on today, no dice. Then I read that there is really no battery inside, or it is good for like an hour maybe ;Bored

I mean- it’s meant to only be used a few times to set it up, then forget it. Doesn’t need to have a huge battery life. It sends the settings to the lights after you hit transmit. Not like it’s actively controlling the lights 24/7

Incidentally, it’s has a 1.2mAh 3.74v lipo in there.