Really liking the Kasa Smart Bar.
I have been so busy with work have not had the time to update.
I have been so busy with work have not had the time to update.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
On a side note. You looks so much like a high school friend's younger brother. His name is Rich too lol...Rich Forrester
Very nice, thanks for the updateHere is a video of the overflow. You have to be right on top of it to hear it. I like it to trickle a tiny bit so I can gauge the flow from the basement.
https://youtube.com/shorts/93BAMymyJH0?feature=share
How's the tank man? I just got an 81g INT and am debating running a basement sump. Hows the electric bill running that DCP-20000 in the basement?This guy....
How's the tank man? I just got an 81g INT and am debating running a basement sump. Hows the electric bill running that DCP-20000 in the11 basement?
My tank just about sits directly over the basement mixing station (which is in my basement garage), do you have any advice for snaking the plumbing through the wall? Any details would be a huge help.Everything is doing well. Going through some diatoms on the sand. Probably because I rinsed it in tap water. All in all it's good.
The pump is doing well. Running about 65% power. Still very quiet. As far as the electric bill, don't know. It's gone down but I went from 3 systems to 1.
No one will ever regret doing a basement sump. If you can you should.
My tank just about sits directly over the basement mixing station (which is in my basement garage), do you have any advice for snaking the plumbing through the wall? Any details would be a huge help.
I figured I would use flexible PVC to plumb down to my DCP-18000 but how I get there is the mystery. It seems difficult to go through the ceiling
My tank just about sits directly over the basement mixing station (which is in my basement garage), do you have any advice for snaking the plumbing through the wall? Any details would be a huge help.
I figured I would use flexible PVC to plumb down to my DCP-18000 but how I get there is the mystery. It seems difficult to go through the ceiling
That is some helpful insight, I forgot how ridgid flex PVC actually is. Drilling through my floor is bad for resale unfortunately lol. Drywall it is with sweep 90's!If your basement/garage has a finished ceiling you will need to cut it out. No matter what in my opinion. To be 100 percent of no future problems.
Posting a short video on my tank's progress. Will be 2 years in July. It is maturing well. Sand bed is starting to turn whiter and polyp extension increases slowly month to month. There have been a few changes though. I have added a kalk stirrer which was a lot of trial and error to get it to be consistently saturated. That problem has been rectified and things are really stable. I am on the fence about adding ozone. I most likely will by the end of summer. The kalk has saved me quite a bit of money since I don't have to dose nearly as much as I used to and my thoughts are ozone will save me money on carbon in the long run. But the coral's reaction to the kalk was overwhelmingly positive.