Looking for flow advice on a 72x29×25 peninsula. Internal acrylic overflow box on one short panel, approx 20" wide leaving around 4-5" on each side of box to mount powerheads.
Right now the plan is to have higher rock structures close to overflow end/powerheads for sps, lps in middle of tank and polyps on far end on lower rocks. Not using alot of live rock in display, maybe 100-125lbs reef saver..lots of pond matrix in sump.
I currently have a couple jebao ow-40s and a jebao gyre cp-120 available, but I know this will not be enough. I would like to stay under $500 for additional powerheads and do not want wires running across tank, so would like to keep powerheads on overflow end.
Right now the plan is to have higher rock structures close to overflow end/powerheads for sps, lps in middle of tank and polyps on far end on lower rocks. Not using alot of live rock in display, maybe 100-125lbs reef saver..lots of pond matrix in sump.
I currently have a couple jebao ow-40s and a jebao gyre cp-120 available, but I know this will not be enough. I would like to stay under $500 for additional powerheads and do not want wires running across tank, so would like to keep powerheads on overflow end.
Last edited: