Frag rack that looks like a rock

[Iamnotyourtrigger]

Does anyone have an STL (3D printed design) for a magnetic frag rack that looks like a rock? The current commercial ones are very expensive.

 

[The_Paradox]

I mean do you want to slide it onto an existing rack or epoxy your own magnets to it? Stl could be generated for either one in a few minutes.

You mean something like this?
Amazon product ASIN B08RCKN2HN

 

[fishguy242]

@tbrown

 

[Iamnotyourtrigger]

I mean do you want to slide it onto an existing rack or epoxy your own magnets to it? Stl could be generated for either one in a few minutes.

You mean something like this?
Amazon product ASIN B08RCKN2HN

Yes, something like that!

 

[The_Paradox]

Any reason you're against getting a piece of live rock and drilling it?

 

[Iamnotyourtrigger]

Any reason you're against getting a piece of live rock and drilling it?

That's not a terrible idea, but to me the weight may be too much. I plan on using some very strong magnets, but I have some tangs that are curious.

 

[The_Paradox]

Give me a second and Ill see if I get the gist.

 

[The_Paradox]

Something like this that you can epoxy standard 1 1/4" magnets into?

 

[tbrown]

Does anyone have an STL (3D printed design) for a magnetic frag rack that looks like a rock? The current commercial ones are very expensive.

Check Thingverse?

 

[Iamnotyourtrigger]

Something like this that you can epoxy standard 1 1/4" magnets into?

oh wow! thats perfect! Yes.

 

[Iamnotyourtrigger]

Check Thingverse?

I've scoured it, but alas, nothing.

 

[The_Paradox]

oh wow! thats perfect! Yes.

Have not printed it but would try:
Supports
Raft
.5mm wall
10% fill

Speed and retraction will depend on your printer. If you want the .stl DM me your email and I’ll send it to you.

 

[tbrown]

I've scoured it, but alas, nothing.

I'll s you what I can dig up when I get home if you want more options?

 

[Rmckoy]

I’ve seen one guys tank where the entire back wall was an epoxy or composite material purchased online .
Applied to the back and side glass and looks like live rock
form it as you want . And even have holes for frag plugs .

In no time it’s covered in coralline

I’ll try to remember the product used

 

[tbrown]

https://www.thingiverse.com/thing:4253653
https://www.thingiverse.com/thing:3464404

 

[vetteguy53081]

I have a couple and you can utilize with a bonsai tree plate but the ones I have for zoa garden is:

And now like this:

 

[Iamnotyourtrigger]

Here's my 3D printed rock frag, courtesy of @The_Paradox . It's holding on well and doing great In full flow with some 32mmX2mm magnets on the back.

 

[paragrouper]

I’ve seen one guys tank where the entire back wall was an epoxy or composite material purchased online .
Applied to the back and side glass and looks like live rock
form it as you want . And even have holes for frag plugs .

In no time it’s covered in coralline

I’ll try to remember the product used

Reef eco coral wall? That’s what I use

 

[SteveMM62Reef]

Ocean’s Wonder, available on Amazon. Comes with the Plugs.