Ghl profilux 4 display issue

[elcapitan1993]

So for some reason the display on my profilux 4 keeps cycling between my probes and “KHD” readings but I don’t have a KHD and I can’t figure out how to get rid of it off the screen

 

[elcapitan1993]

Anyone?

 

[Jubei2006]

Open ghl connect app. Go to top left dropdown menu select Control, select KH Director tab, select disable select to disable record measurement data. Then Save. Then see if it turns off

 

[elcapitan1993]

Open ghl connect app. Go to top left dropdown menu select Control, select KH Director tab, select disable select to disable record measurement data. Then Save. Then see if it turns off

I can’t since I do not own a kh director
,the tab for the kh director isn’t there, is there anything else I can try?

 

[Jubei2006]

Click an arrow on the profilux display. Select system, assign pab, left arrow on the pab device, and select x to remove?

 

[elcapitan1993]

Click an arrow on the profilux display. Select system, assign pab, left arrow on the pab device, and select x to remove?

I removed the device when I got rid of it, when I go into PAB all that shows up is my power bar

 

[ingchr1]

Anything in the Display settings tab that you can uncheck?

 

[elcapitan1993]

Not regarding the kh director

 

[Ditto]

If you Uncheck under the heading Viewable elements all the sensors does it go away?

 

[elcapitan1993]

If you Uncheck under the heading Viewable elements all the sensors does it go away?

I just tried and no it’s the only one that stays there

 

[elcapitan1993]

I figured it out and I wanted to just post it on here just in case anyone else ever has the same issue, I went to Display then where you can select what shows up on the profilux screen I selected level sensor(under miscellaneous), then I saved the settings then I went back and deselected it and saved the settings, it cleared it for some reason, I was literally trying random things to and it worked lol

 

[Jubei2006]

I figured it out and I wanted to just post it on here just in case anyone else ever has the same issue, I went to Display then where you can select what shows up on the profilux screen I selected level sensor(under miscellaneous), then I saved the settings then I went back and deselected it and saved the settings, it cleared it for some reason, I was literally trying random things to and it worked lol

Thanks for letting us know!