jasonrusso
2500 Club Member
- Joined
- Apr 21, 2014
- Messages
- 3,438
- Reaction score
- 2,441
- Location
- Haverhill, MA
- What state or country do you live in
- Massachusetts
My porcupine puffer isn't doing too well and my dwarf eel seems to be a bit less personable (both scaleless).
https://www.reef2reef.com/threads/porcupine-puffer-not-feeling-well.663415/#post-6715827
Earlier this year, I had sky high nutrients in my fowler. Nitrates were well over 100 and phosphates were over 3.0. The nitrates were affecting my lionfish so I fired up a sulfur denitrator and got them down to 10-20. Everyone was happy. The low NO3 and high PO4 (sulfur denitrators don't touch PO4) led to a bad cyano problem. About 3 1/2 weeks ago I started running GFO. Looking back, this is when my puffer started acting weird. PO4 is down to 0.5 and the cyano is clearing up, so I turned off the reactor to see what happens.
https://www.reef2reef.com/threads/porcupine-puffer-not-feeling-well.663415/#post-6715827
Earlier this year, I had sky high nutrients in my fowler. Nitrates were well over 100 and phosphates were over 3.0. The nitrates were affecting my lionfish so I fired up a sulfur denitrator and got them down to 10-20. Everyone was happy. The low NO3 and high PO4 (sulfur denitrators don't touch PO4) led to a bad cyano problem. About 3 1/2 weeks ago I started running GFO. Looking back, this is when my puffer started acting weird. PO4 is down to 0.5 and the cyano is clearing up, so I turned off the reactor to see what happens.
