Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You have a cut, or other damage to that finger.
Rio RV2735 Rid-Volt Titanium Grounding Probe https://a.co/d/3xHpSP9
Such as? It's titanium made for saltwater tank. All of my salt water tanks do this if I have a cut. Fish aren't grounded, so they don't feel it.Definitely, but it's revealing voltage in the tank!
Also - don't these grounding probes just cause more issues?
Such as? It's titanium made for saltwater tank. All of my salt water tanks do this if I have a cut. Fish aren't grounded, so they don't feel it.
I was moving some corals around tonight, and suddenly I realized that I was getting shocks - but only on one finger.
They were significant though, and having read on these forums I immediately thought of "stray voltage" and "heaters"
Well, I started using my magic finger (the others don't seem to detect it) to isolate the sources.
My results were....everything, but ESPECIALLY my reef factory PH meter.
Removing that thing reduces it from a painful shock on the tip of my finger to a noticeable but otherwise not painful shock - like just barely licking a battery as a kid.
And I was able to confirm it wasn't my imagination by putting my other hand in the tank first, and then my 'magic finger' and I would feel nothing - only getting shocked if just that neumatocyst-injected finger touched first!
So what do I do?
It seems to be coming everywhere. I only stop detecting it when I turn everything off.
I've ordered a voltage checker for the water, and I'm going to shop for a new power strip - I run everything off of two, and one of them seems to be the biggest culprit.
PS - I wonder if I got a minor coral sting that I wouldn't have felt but is making this finger tip sensitive to the voltage.
Zzzzzzap
![]()
I isolated between my two power stripsThis is a big misconception. You can have a functional GFCI and still have stray current. Depending on the sensitivity of the GFCI, it may not trip unless the load is significant(ie the type that would kill or damage you).
Have you checked your lights? I know this sounds silly but you could have a loose wire or something being hit with salt creep- a light arm that is conductive and touching water etc.
How long did you wait to test. Stray voltage can linger for a few seconds. Did you try each pump and heater individually?
Why do you say that?I would get yourself a GFCI and then retest only one at a time with nothing else plugged in. It sounds like your power strips are bad- 90% of them are not safe to use with reef equipment to begin with as they’re not designed to handle the load.
If it is UL marked it can handle the full rated load - simple as that.I believe that it is incorrect. You’re carrying more voltage from higher wattage equipment across multiple plugs to a single wall plug. It’s the same reasons fire departments put out notices during the winter season to alert people that electric heaters should be plugged directly into an outlet and not a power strip.
I’ve always plugged my tank stuff into shop grade gfci powerstrips- not the “consumer” grade ones.
Additionally, it’s the reasons many reefers use dj switches- not only can they control their equipment without unplugging, but those strips are designed for much higher draw.