posted a few weeks ago but still in a total nightmare with rodi problems will list what problem is and what i have done. really would love to see some pictures to make sure I have not crossed some tubes somewhere.
system is 75 gpm 7 stage brs unit
first three canisters fill instantly when turned on the di resin cannisters barely fill (currently have no filters in it at all to try and locate problem)
all fittings and flush valve along with auto shut off have been replaced
using a 900 booster bump which is showing 85 psi
virtually no rodi water being produced, and with no filters in place the resin containers are unreal slow to fill
i feel certain i have probably crossed an output with an input when i replaced all fittings , but can't spot it
could sure use some photo's of each line coming out of fittings and valves,
I sure appreciate any help I can get
system is 75 gpm 7 stage brs unit
first three canisters fill instantly when turned on the di resin cannisters barely fill (currently have no filters in it at all to try and locate problem)
all fittings and flush valve along with auto shut off have been replaced
using a 900 booster bump which is showing 85 psi
virtually no rodi water being produced, and with no filters in place the resin containers are unreal slow to fill
i feel certain i have probably crossed an output with an input when i replaced all fittings , but can't spot it
could sure use some photo's of each line coming out of fittings and valves,
I sure appreciate any help I can get