Help with euphyllia BJD

Trixter227

Wrasse Wrangler
View Badges
Joined
Apr 5, 2015
Messages
1,211
Reaction score
1,218
What state or country do you live in
Virginia
Rating - 0%
0   0   0
Wow first emergency post

All my euphyllia have been slowly receding flesh after 8mos of constemt growth and splitting. About 2 weeks decline toll now. Now this morning 1 had a goop of BJD, no pictures but definitely BJD i assume from the exposed skeleton edge.

Now its out the tank. What can i do for the rest of my torches that where basicly touching eathother. Please help i don't
want to loose them all.. lugals?

i will attached parameters, but sadly leaveing for work soon...
 
Last edited:
bjd affects the unhappy/unhealthy corals. If the other corals in the tank are happy/healthy, they should not catch it. My only 2 cases of bjd happened because they were getting stung by frogspawn, but other corals right beside bjd did not get it.

Something must have happened in your tank to those affected corals, the bjd will only spread to others if that "something" is still there. Try to figure out what happened so it can be corrected.
 
Here are the BJD protocols used by two very successful keepers of torches.

Proven treatment method for Euphyllia and similar.
Brown Jelly and tissue recession

Iodine alone will not stop it. It's a tiny bandaid.

1. 2 cups of tank water 1 capful of witch hazel (hydrogen peroxide is fine too). Swirl it around a bit to release the jelly. Dip for 15mins

2. 2 cups of tank water 1/2 package of furan 2. Same process.

3. 2 cups of tank water and iodine until it looks like lightly colored iced tea. Same process.

4. Rinse in tank water. Reintroduce to tank in low light.

Separate dishes for each, don't combine.

For brown jelly or extreme tissue recession, dipping back to back days may be required.

So sorry to see...

That is brown jelly, a sign that bacteria has attacked the torch.

Here is a bath you can use to try and save it.

In a separate container add these ingredients, each case is different so I would suggest this in this case...

4g tank water
Sponge filter
Powerhead

1000mg cipro
10 scoops chemiclean

Mix these 2 first to dissolve the medication.

Then add

Restore 20ml
Amino acids 10ml
Witch hazel 10ml
Lugols Iodine 5 full droppers

Turn power head off after all is mixed and then add the torch.

Before you add the torch take a small tube and suck that nasty stuff off the head of your torch before lifting it out of the water to limit the bacteria getting more into the tank.

Leave the torch for 4 to 6 hours with the sponge winter going to oxygenate the container.
 
bjd affects the unhappy/unhealthy corals. If the other corals in the tank are happy/healthy, they should not catch it. My only 2 cases of bjd happened because they were getting stung by frogspawn, but other corals right beside bjd did not get it.

Something must have happened in your tank to those affected corals, the bjd will only spread to others if that "something" is still there. Try to figure out what happened so it can be corrected.
I believe it was caused by some painters tape in my top off water... Dont ask how it got there. So i removed and cleaned the tank and did a Water change. That was friday. I assumed it stoped the damage however a few have skeleton edges exposed now. Everyday they are all fully extended and plump.

Alk is my 2ed culprit. I corrected this before i discoverd the painters tape howvwer. Alk jumped from 7.9ish to 9.7 in a day or 2.
 
Here are the BJD protocols used by two very successful keepers of torches.
Thank for this, cirpo on the way. The affected torch is sadly tossed. It was a sizeable blob of brown sludge, cut all flow coverd with a bag before moveing it out the tank. Again sadly 3 other torches slap against regularly... i will update!
 
Thank for this, cirpo on the way. The affected torch is sadly tossed. It was a sizeable blob of brown sludge, cut all flow coverd with a bag before moveing it out the tank. Again sadly 3 other torches slap against regularly... i will update!
Glad you figured it out. Or at least correct two other issues. I used the Cipro method also recently and it worked great. Was pretty nervous about it but it worked out. Good luck.
 
Glad you figured it out. Or at least correct two other issues. I used the Cipro method also recently and it worked great. Was pretty nervous about it but it worked out. Good luck.
So i never dosed cipro. I orderd it 1day shipped and it took untill today. About 5 days?
I did do a water change the day of the post and another today. Small 10%ish
Flicked on the UV filter.
No more losses so far. I dont see recession in the flesh, but im not sure how the exposed edges are gonna fare. If i notice anything i will take pictures and start my doseing.
 
Oh! Also that shows me even if a euphyllia is in contact with BJD directly it may not become infected. Yet...
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new