High nitrates

  • Thread starter Thread starter kenand
  • Start date Start date
  • Tagged users Tagged users None

kenand

Active Member
View Badges
Joined
Oct 15, 2023
Messages
278
Reaction score
42
Location
plant city
What state or country do you live in
Florida
Rating - 0%
0   0   0
Has anyone used this to keep nitrates down? Seems to be a problem.

Screenshot_20240813_181639_Chrome.jpg
 
what are your nitrate levels?
 
that is quite high :0, do you have a protein skimmer?
 
I'm somewhat new.

No protein skimmer. It's a 180 gallon. Not drilled. If I get a hob,that will help?
A hob can help, but with a 180 gallon i would say it would be minimal, how big are the water changes?
 
40 gallons. Every 2 weeks.
I would say to just do more frequent water change but i might be wrong, Im sure one of the veteran reefers will have a better say at how to lower them better. my only advice would be if youre feeding a lot to try to lessen the load and get more CUC to clean up the uneaten food
 
So you mean you have no filtration on the tank at all? Just powrheads?

Hob filter by itself is not really sufficient for that size tank and won’t do much to help you. A skimmer or refugium would be better. Water change every 2 weeks won’t do much and for your size tank will just be expensive in salt. Even vodka dosing would be better than adding chemicals.
 
I would say to just do more frequent water change but i might be wrong, Im sure one of the veteran reefers will have a better say at how to lower them better. my only advice would be if youre feeding a lot to try to lessen the load and get more CUC to clean up the unea
I would say to just do more frequent water change but i might be wrong, Im sure one of the veteran reefers will have a better say at how to lower them better. my only advice would be if youre feeding a lot to try to lessen the load and get more CUC to clean up the uneaten food
A
ten food
About the protien skimmer. I was looking at the tunze dc 9012 for a 180-gallon. That should do something for the nitrates?
I would say to just do more frequent water change but i might be wrong, Im sure one of the veteran reefers will have a better say at how to lower them better. my only advice would be if youre feeding a lot to try to lessen the load and get more CUC to clean up the uneaten food
About the skimmer. I had been looking at the tunze
 
About the protien skimmer. I was looking at the tunze dc 9012 for a 180-gallon. That should do something for the nitrates?

About the skimmer. I had been looking at the tunze
I have only ever kept nanos and pico tanks so i unfortunately dont have a recommendation but ive heard bubble Magnus and red sea have decent large skimmers
 
So you mean you have no filtration on the tank at all? Just powrheads?

Hob filter by itself is not really sufficient for that size tank and won’t do much to help you. A skimmer or refugium would be better. Water change every 2 weeks won’t do much and for your size tank will just be expensive in salt. Even vodka dosing would be better than adding chemicals.
I have a cannister filter.
 
So you mean you have no filtration on the tank at all? Just powrheads?

Hob filter by itself is not really sufficient for that size tank and won’t do much to help you. A skimmer or refugium would be better. Water change every 2 weeks won’t do much and for your size tank will just be expensive in salt. Even vodka dosing would be better than adding chemicals.
I have a cannister filter
I have a cannister filter.
I have the fluval 4 type.
 
Every 2 weeks are so. It was used. I have carbon and some filter floss in it. It's not set up like the factory. Could this be the problem and do you recommend a new cannister with the proper set inside?
 
Canister filter is the so-called ‘nitrate factory’ in the hobby. The filter pad will hold food that rots until it’s removed. This might be part of the problem (although every 2 weeks is not bad). You can try changing out the filter pad a little more often to see if that helps reduce nitrate.
 
Canister filter is the so-called ‘nitrate factory’ in the hobby. The filter pad will hold food that rots until it’s removed. This might be part of the problem (although every 2 weeks is not bad). You can try changing out the filter pad a little more often to see if that helps reduce nitrate.
Just wondering if i should buy a new one that's set up properly.
 
That tunze 9012 is not a HOB skimmer. It goes inside the tank.

Hang on the back overflows were popular for years. If you get one, you can have a sump.
 

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 62 57.4%
  • Automated dosing

    Votes: 7 6.5%
  • Mechanical filtration / roller filter

    Votes: 4 3.7%
  • Automated water testing

    Votes: 3 2.8%
  • Automatic feeding

    Votes: 1 0.9%
  • Lighting schedule

    Votes: 21 19.4%
  • Controller and remote monitoring

    Votes: 4 3.7%
  • Leak detection and emergency shutoff

    Votes: 2 1.9%
  • Automatic water changes

    Votes: 3 2.8%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 0.9%
Back
Top
Home
Post thread…
Market
What's new