High Zinc help!

Jaybeastin

Well-Known Member
View Badges
Joined
Sep 10, 2021
Messages
649
Reaction score
299
Location
94203
Rating - 0%
0   0   0
My zinc is high on my ICP test. What steps should I take?

I noticed that I’ve lost a few heads of LPS corals despite good water chemistry.

IMG_9953.jpeg
 

painter1982

Valuable Member
View Badges
Joined
Jul 19, 2025
Messages
1,131
Reaction score
909
Location
82716
Rating - 0%
0   0   0
Have you determined the source? My high zinc ended up being a metal part on a float valve in my RO water barrel.
 
OP
OP
J

Jaybeastin

Well-Known Member
View Badges
Joined
Sep 10, 2021
Messages
649
Reaction score
299
Location
94203
Rating - 0%
0   0   0
Have you determined the source? My high zinc ended up being a metal part on a float valve in my RO water barrel.
Im thinking it’s something in my sump. My kids likes to put stuff in there. I did clean it a few months ago and I had this Problem since last year. My ICP for my RO shows undetectable for zinc. I may have to do a 100% clean of the sump.


Unless it’s the little foil from the mysis packet where you press the cube out and sometime I don’t catch the little foil 🤣
 

painter1982

Valuable Member
View Badges
Joined
Jul 19, 2025
Messages
1,131
Reaction score
909
Location
82716
Rating - 0%
0   0   0
Have you determined the source? My high zinc ended up being a metal part on a float valve in my RO water barrel.
Im thinking it’s something in my sump. My kids likes to put stuff in there. I did clean it a few months ago and I had this Problem since last year. My ICP for my RO shows undetectable for zinc. I may have to do a 100% clean of the sump.


Unless it’s the little foil from the mysis packet where you press the cube out and sometime I don’t catch the little foil 🤣
Do you run ecotech pumps? I read the shaft under the ceramic is made of brass a could be a source of zinc.
 

Subsea

7500 Club Member
View Badges
Joined
Jun 21, 2018
Messages
9,002
Reaction score
11,664
Location
Austin, Tx
Rating - 0%
0   0   0
Using Edward’s Aquifier ground water to grow utilitarian seaweed in outdoor cultivation tanks, when Gracilaria Parvispora was sent off for analysis at a regional agriculture lab, copper was 5ppm and zinc was 2ppm.
Ground water sent in and system water showed zero copper and zero zinc with a lower detection limit of 1 part per billion.

So, macro algae will absorb heavy metals.
 

kfries

Active Member
View Badges
Joined
Aug 10, 2023
Messages
166
Reaction score
76
Location
Avon Lake
Rating - 0%
0   0   0
I am having a similar high zinc level in my tank but not in my RODI. Can Zinc accumulate in algea or other parts of the tank? My zinc level keeps creeping up. I did hit my tank with some fluxrx about 4 weeks ago and cleared out alot of algea. Would that effect it at all?
 

Randy Holmes-Farley

Reef Chemist
View Badges
Joined
Sep 5, 2014
Messages
89,879
Reaction score
93,557
Location
Massachusetts, United States
Rating - 0%
0   0   0
I am having a similar high zinc level in my tank but not in my RODI. Can Zinc accumulate in algea or other parts of the tank? My zinc level keeps creeping up. I did hit my tank with some fluxrx about 4 weeks ago and cleared out alot of algea. Would that effect it at all?

Possible. Dead stuff releases all sorts of organics and trace elements.
 

BryanM

7500 Club Member
View Badges
Joined
Jun 27, 2024
Messages
8,136
Reaction score
9,998
Location
Morgan Hill
Rating - 100%
1   0   0
Im thinking it’s something in my sump. My kids likes to put stuff in there. I did clean it a few months ago and I had this Problem since last year. My ICP for my RO shows undetectable for zinc. I may have to do a 100% clean of the sump.
The horror!
 

DO YOU THINK TECHNOLOGICAL ADVANCEMENTS ARE MORE HELPFUL OR HURTFUL TO REEFING?

  • More helpful.

    Votes: 40 40.4%
  • More hurtful.

    Votes: 4 4.0%
  • I think it depends mostly on the technology.

    Votes: 37 37.4%
  • I think it dependsmostly on the reefer behind the technology.

    Votes: 33 33.3%
Back
Top
Home
Post thread…
Market
What's new