How much water is actually in my tank?

  • Thread starter Thread starter aaron186
  • Start date Start date
  • Tagged users Tagged users None

aaron186

Well-Known Member
View Badges
Joined
Dec 31, 2015
Messages
712
Reaction score
223
Rating - 0%
0   0   0
I’m starting to dose my tank and have somewhat of a dumb question. The BRS calculators ask for your total water volume. Do you use the reported volume from your tank manufacturer? I assume that is empty and totally filled and without equipment rocks and sand. I didn’t calculate how much water I actually put in the tank when I filled it. The tank is a Red Sea Reefer 425. Should I just guess there’s about 90 gallons? Curious what you guys do
 
Well, as I have a fairly good guess of the approxamite weight of the rock used for the aquascaping I subtract that from the weight of the water if there was no aquascaping. But it is just a guess.
 
Umm how much rock and sand do you have... L X W X H (water level) and sump the same then less 20%..
 
I’m starting to dose my tank and have somewhat of a dumb question. The BRS calculators ask for your total water volume. Do you use the reported volume from your tank manufacturer? I assume that is empty and totally filled and without equipment rocks and sand. I didn’t calculate how much water I actually put in the tank when I filled it. The tank is a Red Sea Reefer 425. Should I just guess there’s about 90 gallons? Curious what you guys do
It's usually an estimate by subtracting how much water gets displaced by the rock and sand and subtract it from the total tank volume. But if a sump is attached then add that volume back in. It will take a while to tweak the correct dosage, so testing often during the initial dosing period will be beneficial.
 
I’m starting to dose my tank and have somewhat of a dumb question. The BRS calculators ask for your total water volume. Do you use the reported volume from your tank manufacturer? I assume that is empty and totally filled and without equipment rocks and sand. I didn’t calculate how much water I actually put in the tank when I filled it. The tank is a Red Sea Reefer 425. Should I just guess there’s about 90 gallons? Curious what you guys do
I go with 85-90% of total volume to allow for rock and other items which reduce total volume.
Example - your tank I count as 82 gallons as I believe its 88g total
A 100g tank would be 90 gallons
 
Most tank manufacturers materially overstate the volume of their tanks because they use external dimensions rather than internal. So you’re off by 10% before you even begin to try to estimate displacement by rocks and sand. Fortunately it doesn’t really matter as dosing isn’t that precise anyhow.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new