js-3Design
Active Member
thsank you. What LED drivers are you using? My pt4115 does cause problems.
I Built an open-source LED controller and app from scratch
- Thread starter oldrev
- Start date
-
- Tags
- diy diywizards led pwm
- Tagged users None
OP
OP
oldrev
Community Member
The PT4115 works fine for me, there might be an issue with your circuit. You can try lowering the PWM frequency, like 4k.
Marcelo Bertalha
New Member
OP
OP
oldrev
Community Member
Hello Reefers, I am very excited to announce that my iOS app has finally officially launched on the Apple App Store!
If you are interested, you can directly click the App Store link below to download the official release version:
If you are interested, you can directly click the App Store link below to download the official release version:
AndroidGeek18
New Member
Where can I find the gerber files for the board and will a 3watts led work?
AndroidGeek18
New Member
Nevermind I got it. It’s horizon
khaled_007
New Member
Thank you so much for your efforts, what you've done is truly incredible!
I built a DIY light bar with 3W LEDs and a PWM dimming driver. I even installed a Seeed Studio ESP32 C3 flashed using your program and software.
Everything works perfectly; I can adjust the intensity as I want.
The problem is that I can't adjust the sunrise and sunset times as I want.
For example:
I want to divide the sunrise time into 5 stages over 40 minutes:
1st stage: 7:00–7:10 AM
W: 0%
Red 20%
Green 0%
Blue 5%
2nd stage: 7:10–7:20 AM
W: 20%
Red 40%
Green 10%
Blue 10%
2nd stage: 7:20–7:30 AM
W: 50%
Red 50%
Green 20%
Blue 20%
2nd stage: 7:30–7:40 AM
W: 70%
Red 40%
Green 30%
Blue 30%
3rd stage: 7:40–7:50 AM
W: 90%
Red 40%
Green 30%
Blue 30%
Unfortunately, I can't use these settings in your software (see the image).
Easy mode sets the sunrise cycle to 30 minutes, from 7 PM to 7:30 PM, and I can't change it, for example i cannor put 7:10, 7:20, 7:30, 7:40, or 7:50 for optimal sunrise intensity, or any other time I want.
any suggestions please !
I built a DIY light bar with 3W LEDs and a PWM dimming driver. I even installed a Seeed Studio ESP32 C3 flashed using your program and software.
Everything works perfectly; I can adjust the intensity as I want.
The problem is that I can't adjust the sunrise and sunset times as I want.
For example:
I want to divide the sunrise time into 5 stages over 40 minutes:
1st stage: 7:00–7:10 AM
W: 0%
Red 20%
Green 0%
Blue 5%
2nd stage: 7:10–7:20 AM
W: 20%
Red 40%
Green 10%
Blue 10%
2nd stage: 7:20–7:30 AM
W: 50%
Red 50%
Green 20%
Blue 20%
2nd stage: 7:30–7:40 AM
W: 70%
Red 40%
Green 30%
Blue 30%
3rd stage: 7:40–7:50 AM
W: 90%
Red 40%
Green 30%
Blue 30%
Unfortunately, I can't use these settings in your software (see the image).
Easy mode sets the sunrise cycle to 30 minutes, from 7 PM to 7:30 PM, and I can't change it, for example i cannor put 7:10, 7:20, 7:30, 7:40, or 7:50 for optimal sunrise intensity, or any other time I want.
any suggestions please !
OP
OP
oldrev
Community Member
Thanks for reporting this, fixed in the V0.7.4 app.
BTW, Can I repost your video to Discord's showcase channel?
Last edited:
khaled_007
New Member
thank you so so so mush for the v0.7.4 app
problem solved
Now I can adjust the sunrise and sunset times as I want
you saved my life, you're genius
for the video: yes of corse you can share it where do you want, and i can send you others for my DIY bar led
js-3Design
Active Member
can someone who build with this please tell me more about the LED Drivers they used?
AndroidGeek18
New Member
What driver did u use? Did u have the alum PCB fabricated? Thanks
khaled_007
New Member
AndroidGeek18
New Member
Thanks! Did u fabricate your own gerber and print it?
I used this driver 700mah, 3 leds 3w for 1 driver
khaled_007
New Member
I just bought it from aliexpress, it coast about 1$
AndroidGeek18
New Member
Can u send the link to me please. Thanks
js-3Design
Active Member
Hmm those drivers where causing me a lot of problems...
I used this driver 700mah, 3 leds 3w for 1 driver
What powersupply are you using? 12v?
Did you do anything to them?
I used a 10k resistor from pwm to ground. Did you do that?
js-3Design
Active Member
Its a pt4115 based driver
Just type 700mah led driver in aliexpress and you find dosens of these boards.
khaled_007
New Member
What kind of problems you had with this driver !? It's not a driver but a step down...
I use 24v 20a powersupply connected directly with step down driver without anything else
Biff0rz
Valuable Member
Amazing project. I'm in software engineering and did hw/fw in the past. You did a phenomenal job!! Wow. I'm geeking out over the github lol.
Did you ever evaluate your overall goal? Cheap aquarium lighting? How much does it cost you to build a light to something currently on the market with similar output? It'd be nice to see the outcome "they charge $x for something I made for $y" (and it's better!).
Congrats
Did you ever evaluate your overall goal? Cheap aquarium lighting? How much does it cost you to build a light to something currently on the market with similar output? It'd be nice to see the outcome "they charge $x for something I made for $y" (and it's better!).
Congrats
Similar threads
