I NEED HELP!

  • Thread starter Thread starter bwiniecki
  • Start date Start date
  • Tagged users Tagged users None

bwiniecki

Community Member
View Badges
Joined
Sep 4, 2019
Messages
45
Reaction score
14
Rating - 0%
0   0   0
I have a innovative marine dc 328 return pump and the display for the wave maker is saying E2. The pump isn't starting and ive tried unplugging it and everything else I could thing of. Any solutions?
 
I'm sorry, I know nothing about Inovative Marine and the specific pump. However, have you tried taking it apart and cleaning it?
 
Are you trying it submerged? I believe they have a internal float switch that prevents them from running if your sump runs dry.
 
Error Code Messages:

E1: Over Voltage Protection - Input Voltage Over 30V
E2: Under Voltage Protection - Input Voltage Under 12V
E3: Over Current Protection - Input Current Over 2.5amp
E4: Dry Run Protection - Pump Out of Water
E5: Impeller Seized - Impeller Not Spinning
E6: Controller Board - Chipboard on Controller Overheated
 
I know nothing about the pump, but if its a low voltage issue then it could be the driver, you can try and ramp up the pump to see if it will send more than 12 volts to pump to get it going.
 
You didn't by any chance mix up power adapters with something else?
Not much out there on this pump.
 
You didn't by any chance mix up power adapters with something else?
Not much out there on this pump.
I do this often with my return pump and ATO power supplies since i routinely unplug them and the connections are the same size mounted right next to eachother. Neither equipment works when they get swapped by accident.
+1 Verify power supplies and nomenclature with what voltage it should be supplying.
 
Error Code Messages:

E1: Over Voltage Protection
- Input Voltage Over 30V
E2: Under Voltage Protection - Input Voltage Under 12V
E3: Over Current Protection - Input Current Over 2.5amp
E4: Dry Run Protection - Pump Out of Water
E5: Impeller Seized - Impeller Not Spinning
E6: Controller Board - Chipboard on Controller Overheated

Under Voltage Protection - Perhaps the power supply is bad.
 
Check the pump. Remove impeller and assure there is no obstructions, foreign matter than may be causing current issue
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 4 14.8%
  • Lighting, pumps, or other major equipment

    Votes: 4 14.8%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 7.4%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 7.4%
  • Corals! Must...Have...CORALS!!!

    Votes: 7 25.9%
  • Fish or other livestock

    Votes: 1 3.7%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 3.7%
  • I’m browsing, but don’t have a specific target

    Votes: 4 14.8%
  • I’m not shopping for reef deals this year

    Votes: 1 3.7%
  • Other (Post in the comments)

    Votes: 1 3.7%
Back
Top
Home
Post thread…
Market
What's new