Improved 2 Part Calcium and Alkalinity question

  • Thread starter Thread starter tbrown
  • Start date Start date
  • Tagged users Tagged users None

tbrown

Cronies #3?? Heathens' Coffee Snob???
View Badges
Joined
Nov 22, 2019
Messages
83,017
Reaction score
227,694
Location
Peoria, AZ
Rating - 100%
2   0   0
Good day Randy! I was reading through your article on the DIY Improved 2 Part Calcium and Alkalinity dosing and I think I've got it but wanted to make sure:

On the dosing instructions I add 1 mL per gallon of actual total system water for my mixed reef tank. That's for both the calcium and alkalinity, correct? My tank and sump actual total water is approximately 70 gallons so I would add 70 mL calcium and 70 mL alkalinity daily, correct? Not 0.5 mL of each for a total of 1 mL?

Then, after 1 gallon of each has been dosed, add a 2.5 cups of the magnesium?

https://reefkeeping.com/issues/2006...297 grams of baking,of alkalinity (2660 dKH).
 
Good day Randy! I was reading through your article on the DIY Improved 2 Part Calcium and Alkalinity dosing and I think I've got it but wanted to make sure:

On the dosing instructions I add 1 mL per gallon of actual total system water for my mixed reef tank. That's for both the calcium and alkalinity, correct? My tank and sump actual total water is approximately 70 gallons so I would add 70 mL calcium and 70 mL alkalinity daily, correct? Not 0.5 mL of each for a total of 1 mL?

Then, after 1 gallon of each has been dosed, add a 2.5 cups of the magnesium?

https://reefkeeping.com/issues/2006...297 grams of baking,of alkalinity (2660 dKH).

The final sentence is correct, but spreading it out over the time period where the 1 gallon is used is better. Also, an improved recipe using Balling Part C instead of most of that mag part is even better.
 
The final sentence is correct, but spreading it out over the time period where the 1 gallon is used is better. Also, an improved recipe using Balling Part C instead of most of that mag part is even better.
The dose of the alk and calcium parts should be gauged by alk demand. :)
Sounds good, thanks! I have 3 dosing heads available so I can definitely make it work. Half hour apart per each is recommended still?
 
I have several pounds of magnesium flake and Epsom salts but I'll definitely look into the balling.
 
Sounds good, thanks! I have 3 dosing heads available so I can definitely make it work. Half hour apart per each is recommended still?

That’s a fine plan, yes. Even a few min is fine in most cases.
 

TOP 10 Trending Threads

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 36 58.1%
  • Automated dosing

    Votes: 3 4.8%
  • Mechanical filtration / roller filter

    Votes: 4 6.5%
  • Automated water testing

    Votes: 3 4.8%
  • Automatic feeding

    Votes: 0 0.0%
  • Lighting schedule

    Votes: 9 14.5%
  • Controller and remote monitoring

    Votes: 3 4.8%
  • Leak detection and emergency shutoff

    Votes: 1 1.6%
  • Automatic water changes

    Votes: 2 3.2%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 1.6%
Back
Top
Home
Post thread…
Market
What's new