Iodine Help!

  • Thread starter Thread starter 3ncore8
  • Start date Start date
  • Tagged users Tagged users None

3ncore8

New Member
View Badges
Joined
Feb 12, 2021
Messages
18
Reaction score
3
Location
malaysia
What state or country do you live in
Other International
Rating - 0%
0   0   0
Hi Randy,
Please help,
Recently I have tested my iodine and found out sky high 0.127 mg/L , I have water change for 2 weeks about 3 times but the iodine still couldn’t lower down, and my SPS was started whitish from the bottom to top (RTN)?? Any way to lower down the iodine ? As currently I have carbon running but seem doesn’t help.
 
That value is not sky high. It's only 2x the natural level, and I don't think its any issue. :)

Carbon doesn't bind appreciable iodide or iodate from seawater. That's a myth that, IMO, may be based on the fact that a different chemical (I2) does bind to it and is used as a measure of GAC surface area in some industries.
 
Hi Randy,
Please help,
Recently I have tested my iodine and found out sky high 0.127 mg/L , I have water change for 2 weeks about 3 times but the iodine still couldn’t lower down, and my SPS was started whitish from the bottom to top (RTN)?? Any way to lower down the iodine ? As currently I have carbon running but seem doesn’t help.
May I ask what test kit are you using?

Rick
 
That value is not sky high. It's only 2x the natural level, and I don't think its any issue. :)

Carbon doesn't bind appreciable iodide or iodate from seawater. That's a myth that, IMO, may be based on the fact that a different chemical (I2) does bind to it and is used as a measure of GAC surface area in some industries.
Hi Randy,
Where can I get the (I2) product ? Like brightwell ? And how should I use on it ? And sorry I’m new and what is GAC ? Please guide me, thanks randy
 
That value is not sky high. It's only 2x the natural level, and I don't think its any issue. :)

Carbon doesn't bind appreciable iodide or iodate from seawater. That's a myth that, IMO, may be based on the fact that a different chemical (I2) does bind to it and is used as a measure of GAC surface area in some industries.
I found that my SPS was turned to this after the iodine is higher. Any advices ? The SPS turn to this then slowly the SPS whitish from bottom part to upper then finally whole coral gone. Attached photo for your advices .
 

Attachments

  • 61E474BA-1425-45FF-875E-D610C13FD5E7.jpeg
    61E474BA-1425-45FF-875E-D610C13FD5E7.jpeg
    191.8 KB · Views: 84
  • D1A93C76-4AFB-4CAA-A2EF-C2A4A5195D47.jpeg
    D1A93C76-4AFB-4CAA-A2EF-C2A4A5195D47.jpeg
    171.5 KB · Views: 117
Hi Randy,
Where can I get the (I2) product ? Like brightwell ? And how should I use on it ? And sorry I’m new and what is GAC ? Please guide me, thanks randy
Lugols contains I2 and I-, but I think dosing the natural forms present in seawater are better, especially iodide which is the most bioavailable form. Potassium iodide or sodium iodide, if you can find it, or many hobby brands.
 
I found that my SPS was turned to this after the iodine is higher. Any advices ? The SPS turn to this then slowly the SPS whitish from bottom part to upper then finally whole coral gone. Attached photo for your advices .

I do not think that your iodine level is causing the coral problems by being too high. Is that what you are suggesting?
 
Hi Randy,
Where can I get the (I2) product ? Like brightwell ? And how should I use on it ? And sorry I’m new and what is GAC ? Please guide me, thanks randy
I think randy is referring to a myth based on I2. That is iodometry that measures carbon (gac) surface area. Most of the iodine in seawater is iodide, and iodate.
 
I do not think that your iodine level is causing the coral problems by being too high. Is that what you are suggesting?
Ok randy, so as per my previously attached photo , any possibility that causing the coral like that ?
 
I think randy is referring to a myth based on I2. That is iodometry that measures carbon (gac) surface area. Most of the iodine in seawater is iodide, and iodate.
Yes , and I found out that my SSC coral was turning darken
 
@3ncore8 In past I have kept my levels between .08 - .10 no problems. I see two things on that coral though. Picture one looks like bite marks, and othter vermetid snail.
 
@3ncore8 In past I have kept my levels between .08 - .10 no problems. I see two things on that coral though. Picture one looks like bite marks, and othter vermetid snail.
Hi , is that whitish are cause by the vermetid snail ?
 
Lugols contains I2 and I-, but I think dosing the natural forms present in seawater are better, especially iodide which is the most bioavailable form. Potassium iodide or sodium iodide, if you can find it, or many hobby brands.
Thanks randy, other than this , any others product that after dose can decrease the iodine in my tank level ?
 
Ok randy, so as per my previously attached photo , any possibility that causing the coral like that ?

At risk of beating a dead horse, no.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 17.7%
  • Fish or coral food

    Votes: 5 5.2%
  • Test kits or reagents

    Votes: 10 10.4%
  • Filter media or replacement fleece

    Votes: 5 5.2%
  • RO/DI filters or supplies

    Votes: 15 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 12 12.5%
  • I keep a backup of everything

    Votes: 25 26.0%
  • Other (Post in the comments)

    Votes: 7 7.3%
Back
Top
Home
Post thread…
Market
What's new