Hi there,
I was using my Kamoer FX-STP to slowly drip Kalk To my display for 12 hours a day. I had to stop using it, because the flow rate would not stay constant. I originally thought it was because I was cycling the power and it wasn't starting back up at the original flow rate.
After taking the pump out of service, I tested it by running it 24 hours per day for the last 5 days or so. Each day the flow rate increases by 2-4 ml/min. Obviously this is unacceptable for a continuous duty dosing pump that I was planning on using for my Vertex calcium reactor.
Any ideas on how to remedy this, or things I might be able to check? Root cause?
Let me know your thoughts, and thank you in advance.
Nathan
I was using my Kamoer FX-STP to slowly drip Kalk To my display for 12 hours a day. I had to stop using it, because the flow rate would not stay constant. I originally thought it was because I was cycling the power and it wasn't starting back up at the original flow rate.
After taking the pump out of service, I tested it by running it 24 hours per day for the last 5 days or so. Each day the flow rate increases by 2-4 ml/min. Obviously this is unacceptable for a continuous duty dosing pump that I was planning on using for my Vertex calcium reactor.
Any ideas on how to remedy this, or things I might be able to check? Root cause?
Let me know your thoughts, and thank you in advance.
Nathan