Kessil a160we lighting for corals

newreefer95

New Member
View Badges
Joined
Jun 4, 2022
Messages
2
Reaction score
0
Location
California
What state or country do you live in
California
Rating - 0%
0   0   0
I bought a deep blue 80 gallon frag tank (my first non-nano tank). It’s 4 foot long and 16 inches deep. I have 2 Kessil A160we lights at 7 inches above the water level. Does anyone have recommendations on a lighting schedule that I can use for mainly Zoa's to start. I also have the Kessil spectrum x controller to make it easier.
 
As far as time on at least 6 hours but not mor than 12 hours. As far as spectrum and intensity that will depend prefferences of the animals you're keeping.
 
I think you can mount the lights a little higher to gain more spread. I think 6 - 8hrs peak is good with an hour or two ramp on either side. Color is personal preference, but I think you start with 100% intensity and see how the zoas respond. At 16" deep, you should be fine. Just observe the animals and they'll tell you if you need more intensity or a longer peak period.
 
I think you can mount the lights a little higher to gain more spread. I think 6 - 8hrs peak is good with an hour or two ramp on either side. Color is personal preference, but I think you start with 100% intensity and see how the zoas respond. At 16" deep, you should be fine. Just observe the animals and they'll tell you if you need more intensity or a longer peak period.
Oh ok so 100 percent should I peak it at 100 or just ramp it up right away?
 
Oh ok so 100 percent should I peak it at 100 or just ramp it up right away?
I would ramp for at least an hour or more, just depends how long you want your photo period to be? I tend to use 12hr light cycles, which always worked well for me.
 

TOP 10 Trending Threads

IF ONE SYSTEM FAILED WHILE YOU WERE AWAY, WHICH WOULD WORRY YOU MOST?

  • Power or backup power

    Votes: 5 25.0%
  • Heating or cooling

    Votes: 1 5.0%
  • Auto top-off

    Votes: 3 15.0%
  • Return pump or water circulation

    Votes: 1 5.0%
  • Dosing or automated testing

    Votes: 0 0.0%
  • Plumbing, overflow, or leaks

    Votes: 3 15.0%
  • Tank sitter or remote monitoring

    Votes: 1 5.0%
  • Electrical failure of some sort

    Votes: 0 0.0%
  • Seam or structure failure

    Votes: 3 15.0%
  • Something else (tell us in the comments)

    Votes: 3 15.0%
Back
Top
Home
Post thread…
Market
What's new