Kessil H160 Flora

[Willz]

Hello all,

I recently bought some Kessil 160 Flora lights. I also, unfortunately, bought the Kessil Spectral X controller, which is compatible with the lights but is really for the 300 series lights.

The SpectralX unit allows for me to program the following variables: intensity, violet, red, and green. And obviously the time.

My questions are:

1. Is anyone familiar with what the appropriate settings on the SpectralX/H160 flora are for the purpose of growing macro algae?

2. I’m running it at night on a reverse cycle from the main lights. I run it from midnight to 9am (e.g., 9 hours). From your experience what is an acceptable amount of time to run them?

I’ve been using it for about a month and my macro (red oggo) is shrinking and shedding and I don’t want to kill it. So any in scope help would be greatly appreciated!

Thanks!

Will

 

[drtrash]

Start slow, 6 hrs and adjust according to desired growth rate, use at 100%, dont need controller, great light have month for a few months, better than previous h380 and h80

 

[Brian Fabiano]

Hello all,

I recently bought some Kessil 160 Flora lights. I also, unfortunately, bought the Kessil Spectral X controller, which is compatible with the lights but is really for the 300 series lights.

The SpectralX unit allows for me to program the following variables: intensity, violet, red, and green. And obviously the time.

My questions are:

1. Is anyone familiar with what the appropriate settings on the SpectralX/H160 flora are for the purpose of growing macro algae?

2. I’m running it at night on a reverse cycle from the main lights. I run it from midnight to 9am (e.g., 9 hours). From your experience what is an acceptable amount of time to run them?

I’ve been using it for about a month and my macro (red oggo) is shrinking and shedding and I don’t want to kill it. So any in scope help would be greatly appreciated!

Thanks!

Will

You ever find the Spectral X Controller settings for H160 for growing macro algae?

 

[Willz]

Double post.

 

[Willz]

No, unfortunately all the macro died. I wish someone would post with specific percentages and times. I have 6 of these lights and was using one on the refugium before using the other five over a new 110g macro and seahorse tank.

 

[Brian Fabiano]

I emailed Kessil:

Brian,
You would put 40% for CLR (color) for Grow. The VI, R, G needs to be at 0 because these are used for tuna blue lights for color customization. Let us know if you have further questions. Thank you!
Regards,
Tiffany

[email protected]

 

[Willz]

Thanks for checking!!! I’ll start ordering some macro and see how it goes :)