Led makeup of ecotech gen4 pro

thehammer1985 · Jan 10, 2019

Hi I was wondering if anyone knows the exact specs on the type of led chips they use on the ecotech gen 4 radion. 2 reasons , 1. I think anna review what they are using before i buy the upgrades for my 2 gen 2 pros , and 2. i also have a mimicked build on my biocube and want to upgrade the led chips. any help or advise would be awesome thank you in advance.

Porpoise Hork · Jan 10, 2019

The best information I could find on the G4's is listed here, however it does not list the actual led chips used. With more digging I found that they are listed to be using CREE, OSRAM and Semiled chips, but not sure what specific ones though.

oreo54 · Jan 10, 2019

Only CREE uses the term "photo red".. CREE will probably not have any past royal blue..
you can make some assumptions from this:
http://angloamericanoffice.com/radion-leds/

Chances are many are the same as in the g3

theatrus · Jan 10, 2019

oreo5457 said:
Only CREE uses the term "photo red".. CREE will probably not have any past royal blue..
you can make some assumptions from this:
http://angloamericanoffice.com/radion-leds/

Chances are many are the same as in the g3

Is expect the same. The OSRAM RBs are nice if you can back them with a 2A driver.

thehammer1985 · Jan 10, 2019

I dont know why I didnt think about the gen 3 chart I had seen it before. Thank you all very much I really appreciate it. It kind of bums me out the diy lighting isnt as hot as it once was i used to be able to get a lot of good info off these forums

theatrus · Jan 10, 2019

thehammer1985 said:
I dont know why I didnt think about the gen 3 chart I had seen it before. Thank you all very much I really appreciate it. It kind of bums me out the diy lighting isnt as hot as it once was i used to be able to get a lot of good info off these forums

It’s still very much alive :)