I'm new to aquariums, installing thing level is part of my job.
From the blurry picture, your using plastic black shims? I would recommend trashing those and getting these
https://www.lowes.com/pd/Nelson-Woo...0cEVphSTzLf-cPtSK8hoCWfYQAvD_BwE&gclsrc=aw.ds
you can stack shims, if one is not tall enough. Start on the longest side, and shim up the lower side up to level, then do the same on the short side. at this point you should have only 2 shims ( or 2 sets if you have to stack up) and the tank level. if it rocks a little, stick one on the 3rd corner. Once you get it level and solid, you "stuff" the gaps. Just insert shims until they're snug. Check both ways to make sure your still level length and width. Then you can break, or use a razor blade to cut the shims. a Little paint on the ends of the shim should help hide the end grain.
Best of luck!