- Joined
- May 2, 2018
- Messages
- 45
- Reaction score
- 70
Here is a little dilema I have, my internal plastic overflow box seems to have a crack that starts half way, and goes down all the way to the bottom, so now I am running the risk of having the tank drain into my sump all the way down to the level of the lower overflow pipe. Obviously, there is no way in hell my sump can take so much water. So I am an outage away from a living room full of water. Are there any solutions to fixing that crack on that plastic box while the tank has some water? Are there any super glue and/or silicones that I can use that will dry fast enough to avoid having to drain the whole tank?
I have the Herbie overflow system, so my lower pipe is much lower than the water level, so since my tank is 400 gallons, I could potentially have 80 to 100 gallons go into the sump/floor.
I have the Herbie overflow system, so my lower pipe is much lower than the water level, so since my tank is 400 gallons, I could potentially have 80 to 100 gallons go into the sump/floor.