I've been having trouble trying to get my Fountainhead RO/DI filter rated at 75 GPD to work properly and I'm at the point now where I'm getting around 30 PSI on my pressure gauge and the purified water is taking hours just to fill a 5 gallon bucket. I have no idea what could be the issue as my hose pressure is what I assume to be high enough when testing it with the normal tubing. I don't know if its a problem with the flow restrictor because the site said I didn't need to really mess with it if I had a manual flush valve which came installed on it. I'm stumped.
The system came with the following:
ASV Valve installed
Manual Flush Valve installed
Ball Valve installed
and Flow Restrictor installed
I only ever tampered the tubing to add the pressure gauge and the TDS Monitor and screwing in the housings and filters. The filters should be installed correctly too but I'll do a pass on them just in case but I doubt it'll fix anything. This is getting frustrating and I could really use any help if anyone's experienced with this system.
The system came with the following:
ASV Valve installed
Manual Flush Valve installed
Ball Valve installed
and Flow Restrictor installed
I only ever tampered the tubing to add the pressure gauge and the TDS Monitor and screwing in the housings and filters. The filters should be installed correctly too but I'll do a pass on them just in case but I doubt it'll fix anything. This is getting frustrating and I could really use any help if anyone's experienced with this system.