Luna Reef Filter Basket

[That Crusso Kid]

Can do! You'd be surprised how high it'd bounce though

I went back and fixed the original post for you.

 

[Red_Beard]

Cashiers check... common man, where's the trust lol

 

[tbrown]

Cashiers check... common man, where's the trust lol

I heard it bounced about as high as the check...

 

[punky_rymn]

I’m interested as well honestly. Haven’t found one anywhere.

 

[That Crusso Kid]

I heard it bounced about as high as the check...

For the one you designed, I’m curious; how much of a gap did you leave between the basket and walls? In other words, the compartment is 8” x 4” x 8”. What dimensions did you make the basket you designed?

@docscorals - related to the above; are there specific dimensions you would like the basket made?

 

[tbrown]

For the one you designed, I’m curious; how much of a gap did you leave between the basket and walls? In other words, the compartment is 8” x 4” x 8”. What dimensions did you make the basket you designed?

@docscorals - related to the above; are there specific dimensions you would like the basket made?

I think it's a .5mm gap so pretty close. I'll have to check later but I won't be home for about a week. Headed to an out-of-state conference until Friday.

 

[tbrown]

Chris, I shot you the link to the design.

 

[docscorals]

I heard it bounced about as high as the check...

For the one you designed, I’m curious; how much of a gap did you leave between the basket and walls? In other words, the compartment is 8” x 4” x 8”. What dimensions did you make the basket you designed?

@docscorals - related to the above; are there specific dimensions you would like the basket made?

Ideally I’d like it to fit the entire section. The weir goes almost completely across.

 

[docscorals]

For the one you designed, I’m curious; how much of a gap did you leave between the basket and walls? In other words, the compartment is 8” x 4” x 8”. What dimensions did you make the basket you designed?

@docscorals - related to the above; are there specific dimensions you would like the basket made?

I think it's a .5mm gap so pretty close. I'll have to check later but I won't be home for about a week. Headed to an out-of-state conference until Friday.

That would be perfect.

 

[tbrown]

I.sent the file to Chris so he can potentially clean it up from where I left it.

The first drawer shelf is at the top of the bottom weirs. The second goes right to the bottom of the top weirs.

I may have a better idea in mind but it'll be a week before I can access my computer and put it in to design.

 

[That Crusso Kid]

Chris, I shot you the link to the design.

I got your design and replied to you but you must have been busy with travelling.

I may have some time tomorrow to look at your design.

 

[tbrown]

I got your design and replied to you but you must have been busy with travelling.

I may have some time tomorrow to look at your design.

Sorry, pretty sure we got some bad gas out here... Spent yesterday swapping spark plugs and coils trying to eliminate misfires. Get one fixed, another one starts.

 

[docscorals]

I got your design and replied to you but you must have been busy with travelling.

I may have some time tomorrow to look at your design.

Sorry, pretty sure we got some bad gas out here... Spent yesterday swapping spark plugs and coils trying to eliminate misfires. Get one fixed, another one starts.

Nice. Sounds like quite a day .

 

[tbrown]

Nice. Sounds like quite a day .

Yep. 116°, no shade.

 

[docscorals]

Nice. Sounds like quite a day .

Yep. 116°, no shade.

 

[That Crusso Kid]

Yep. 116°, no shade.

Guy chooses to live in a desert and then complains about the heat. Even if he was in a different desert from where he lives. Pffffft...

On a more serious note: @docscorals - can you get exact measurements for us of the section the media caddy will go in? Please include L x W x H measured on the inside of the section. Also, please get measurements from the bottom of the tank to the bottom of each weir section and the length of height of the weirs. Thanks.

 

[docscorals]

Yep. 116°, no shade.

Guy chooses to live in a desert and then complains about the heat. Even if he was in a different desert from where he lives. Pffffft...

On a more serious note: @docscorals - can you get exact measurements for us of the section the media caddy will go in? Please include L x W x H measured on the inside of the section. Also, please get measurements from the bottom of the tank to the bottom of each weir section and the length of height of the weirs. Thanks.

You bet. I’ll get this to you first thing tomorrow morning. Thanks!

 

[docscorals]

Yep. 116°, no shade.

Guy chooses to live in a desert and then complains about the heat. Even if he was in a different desert from where he lives. Pffffft...

On a more serious note: @docscorals - can you get exact measurements for us of the section the media caddy will go in? Please include L x W x H measured on the inside of the section. Also, please get measurements from the bottom of the tank to the bottom of each weir section and the length of height of the weirs. Thanks.

You bet. I’ll get this to you first thing tomorrow morning. Thanks!

So the overflow section of their rear is 8 3/8 inch long, 3 15/16 inch wide, 7 3/4 inch high

The top of the weir that goes from section 1 to section 2 of the rear compartment is at 1.5 inches

The bottom of the weir draining the display to the overflow is at 6 inches.

The weir are 2 1/4 inch high.

 

[docscorals]

Yep. 116°, no shade.

Guy chooses to live in a desert and then complains about the heat. Even if he was in a different desert from where he lives. Pffffft...

On a more serious note: @docscorals - can you get exact measurements for us of the section the media caddy will go in? Please include L x W x H measured on the inside of the section. Also, please get measurements from the bottom of the tank to the bottom of each weir section and the length of height of the weirs. Thanks.

You bet. I’ll get this to you first thing tomorrow morning. Thanks!

So the overflow section of their rear is 8 3/8 inch long, 3 15/16 inch wide, 7 3/4 inch high

The top of the weir that goes from section 1 to section 2 of the rear compartment is at 1.5 inches

The bottom of the weir draining the display to the overflow is at 6 inches.

The weir are 2 1/4 inch high.

Hi @That Crusso Kid, just checking back.

 

[tbrown]

Sorry, I've been busy lately with car troubles and work and haven't had more than a few minutes in front of the laptop. Chris sent me his file so I'll try to take a look and see how easily I can adjust the dimensions.