Luna Reef Filter Basket

[tbrown]

Sounds like a decent plan!

 

[That Crusso Kid]

@docscorals - "I think 2. That will give me three workable compartments. Top for floss, middle for media, and I can place biomedia on the bottom."

Ask for three and you'll get three. Do you want them spaced out equally? (I would advise against this as it will only give you three compartments that will be about 1 2/3".

 

[docscorals]

@docscorals - "I think 2. That will give me three workable compartments. Top for floss, middle for media, and I can place biomedia on the bottom."

Ask for three and you'll get three. Do you want them spaced out equally? (I would advise against this as it will only give you three compartments that will be about 1 2/3".

Since the overflow section of their rear is 7 3/4 inch high and the bottom of the weir draining the display to the overflow is at 6 inches, if we make the top of the first shelf so it is 1/4 inch below that it should provide just enough depth for filter floss, I think.

That would leave 5.5 inches to divide between the other two sections? Am I thinking about this right?

 

[tbrown]

Since the overflow section of their rear is 7 3/4 inch high and the bottom of the weir draining the display to the overflow is at 6 inches, if we make the top of the first shelf so it is 1/4 inch below that it should provide just enough depth for filter floss, I think.

That would leave 5.5 inches to divide between the other two sections? Am I thinking about this right?

Yes, mostly. I'd give it 3/8" below if it's 1/4" filter floss. That gives you just under 5.5" (5 & 3/8") with (3) 1/8" shelves gives you approximately 2.5" of usable height per shelf. And still has the bottom in front of the weirs for your bioballs or any larger media you wanted to use. I'd avoid using bagged media down there just because they can have a tendency to plug up and then they'd potentially block the lower weirs.

 

[docscorals]

Since the overflow section of their rear is 7 3/4 inch high and the bottom of the weir draining the display to the overflow is at 6 inches, if we make the top of the first shelf so it is 1/4 inch below that it should provide just enough depth for filter floss, I think.

That would leave 5.5 inches to divide between the other two sections? Am I thinking about this right?

Yes, mostly. I'd give it 3/8" below if it's 1/4" filter floss. That gives you just under 5.5" (5 & 3/8") with (3) 1/8" shelves gives you approximately 2.5" of usable height per shelf. And still has the bottom in front of the weirs for your bioballs or any larger media you wanted to use. I'd avoid using bagged media down there just because they can have a tendency to plug up and then they'd potentially block the lower weirs.

Perfect

 

[That Crusso Kid]

Since the overflow section of their rear is 7 3/4 inch high and the bottom of the weir draining the display to the overflow is at 6 inches, if we make the top of the first shelf so it is 1/4 inch below that it should provide just enough depth for filter floss, I think.

That would leave 5.5 inches to divide between the other two sections? Am I thinking about this right?

Yes, mostly. I'd give it 3/8" below if it's 1/4" filter floss. That gives you just under 5.5" (5 & 3/8") with (3) 1/8" shelves gives you approximately 2.5" of usable height per shelf. And still has the bottom in front of the weirs for your bioballs or any larger media you wanted to use. I'd avoid using bagged media down there just because they can have a tendency to plug up and then they'd potentially block the lower weirs.

No, it does not leave 5.5" to divide. The reason is that the feet on the bottom of the container need to be taken into account.

Since the bottom weir from the 1st chamber to the 2nd chamber is 1.5" tall then the legs need to be at least that tall. I would recommend making the legs 1.75" tall. This will leave about 4.25" of space for the 3 shelves.

 

[That Crusso Kid]

Hey @docscorals - we haven't forgotten about you. I had a SNAFU with the original files. As such, I decided to start from scratch again and redesign the Media Caddie. I am working on it and should have something suitable soon. As soon as I do, I will post pics here before printing.

 

[docscorals]

Hey @docscorals - we haven't forgotten about you. I had a SNAFU with the original files. As such, I decided to start from scratch again and redesign the Media Caddie. I am working on it and should have something suitable soon. As soon as I do, I will post pics here before printing.

Thanks!

 

[That Crusso Kid]

After some designing, redesigning, printing, redesigning and printing, I give you the Luna Reef 36 AIO Media Caddy. I might add that there could have been some tomfoolery, chicanery and naps taken.

Below are general pictures. The post below this post will contain pictures with dimensions included.

 

[CoralB]

After some designing, redesigning, printing, redesigning and printing, I give you the Luna Reef 36 AIO Media Caddy. I might add that there could have been some tomfoolery, chicanery and naps taken.

Below are general pictures. The post below this post will contain pictures with dimensions included.

 

[That Crusso Kid]

Below are pics with specific measurements. All measurements are given in millimeters.

Left to right...

Bottom to top...

Front to back...

Bottom to top (front cover only)...

Opening from ground to bottom of main body (water flowthrough area to tank)...

The internal shelves are located at 44.45mm, 90.14mm and 135.83mm from the ground moving towards the top.

 

[CoralB]

Below are pics with specific measurements. All measurements are given in millimeters.

Left to right...

Bottom to top...

Front to back...

Bottom to top (front cover only)...

Opening from ground to bottom of main body (water flowthrough area to tank)...

 

[That Crusso Kid]

@docscorals - The front cover can slide onto the main body from the top or bottom. Please be aware that the cover fits snugly. This is by design.

 

[CoralB]

@docscorals - The front cover can slide onto the main body from the top or bottom. Please be aware that the cover fits snugly. This is by design.

 

[tbrown]

Why are you confused? Chris designed this for Docs Corals, silly.

 

[docscorals]

This is AWESOME!

 

[docscorals]