Microbubbles

  • Thread starter Thread starter kenand
  • Start date Start date
  • Tagged users Tagged users None

kenand

Active Member
View Badges
Joined
Oct 15, 2023
Messages
278
Reaction score
42
Location
plant city
What state or country do you live in
Florida
Rating - 0%
0   0   0
No microbubbles in the sump anywhere. I assume they are coming from one or both of the batbs in the pics,correct? Can only get the clamps so tight. What next?

20231114_192819.jpg 20231114_193135.jpg
 
If this is all a brand new setup that was just started up they will dissipate on their own over a few days.

Micro bubbles would not be coming from the return line back to the tank. This line is under pressure not a vacuum drawing air in. They have to be coming from your skimmer or your return pump sucking air in.
 
If this is all a brand new setup that was just started up they will dissipate on their own over a few days.

Micro bubbles would not be coming from the return line back to the tank. This line is under pressure not a vacuum drawing air in. They have to be coming from your skimmer or your return pump sucking air in.
It's 2 months old. Sump looks bubble free. Just coming out of the nozzles.
 
I will. But do you know why the bubbles are coming out if the nozzles? Mo simp bubbles, nothing from the skimmer.
 
If this is all a brand new setup that was just started up they will dissipate on their own over a few days.

Micro bubbles would not be coming from the return line back to the tank. This line is under pressure not a vacuum drawing air in. They have to be coming from your skimmer or your return pump sucking air in.
Venturi syphon says otherwise... this is not a deadheaded pressurized circuit. Its water free flowing through open plumbing, it absolutely can and will draw air in through a bad connection without leaking. Though I expect salt creep will kick in eventually. Most skimmers would be a easy example. Not saying that's OP's issue either, just possible.
 
How close are powerheads to the surface? Sometimes they can occasionally form cyclones(?) And draw air into the propeller
 
Venturi syphon says otherwise... this is not a deadheaded pressurized circuit. Its water free flowing through open plumbing, it absolutely can and will draw air in through a bad connection without leaking. Though I expect salt creep will kick in eventually. Most skimmers would be a easy example. Not saying that's OP's issue either, just possible.
I have the skimmer unplugged now to see if they go away.
 
Look a sump water with a flashlight..
 

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 11 15.7%
  • Fish or coral food

    Votes: 4 5.7%
  • Test kits or reagents

    Votes: 6 8.6%
  • Filter media or replacement fleece

    Votes: 4 5.7%
  • RO/DI filters or supplies

    Votes: 11 15.7%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 8 11.4%
  • I keep a backup of everything

    Votes: 20 28.6%
  • Other (Post in the comments)

    Votes: 6 8.6%
Back
Top
Home
Post thread…
Market
What's new