mixed reef heavy to sps not doing well- help!

acropora4u

2500 Club Member
View Badges
Joined
Mar 10, 2012
Messages
2,746
Reaction score
1,200
Location
here
What state or country do you live in
New York
Rating - 0%
0   0   0
i think its the nutrients are too low but need opinions - nitrate is 5ppm and phosphate is 0.01.. alk is 8.5 calcium 420 mag 1300

what do you all think?
 
They all have red algea that is on them, i blow it off and an hour later its back on..
 
Sounds like cyano to me. Read up on the many resources to combat this.
 
Sounds like cyano to me. Read up on the many resources to combat this.
does this look like cyano? if so i will use chemiclean

IMG_2575.JPG IMG_2576.JPG IMG_2577.JPG
 
Blow all the surfaces loose with a turkey baster. Reduce white light intensity for a few days and assure you have adequate clean up crew. ( snails. . . turbo, astrea, nassarius, trochus, nerite and a few blue leg hermits)
ARE YOU USING RO WATER OR TAP WATER FROM THE FAUCET? ALSO IS TANK BY OR NEAR A WINDOW?

One thing to enforce with a mixed reef is you must run carbon ( I run chemiPure blue) as softies/LPS emit toxins that will affect SPS in the same tank. Carbon will reduce these toxins.

Assure you have the following in range:

Temp: 77-79
Salinity 1.025
Mag 1300
CA 450
Alk 8-9
ph 8.1-8.3
 
Blow all the surfaces loose with a turkey baster. Reduce white light intensity for a few days and assure you have adequate clean up crew. ( snails. . . turbo, astrea, nassarius, trochus, nerite and a few blue leg hermits)
ARE YOU USING RO WATER OR TAP WATER FROM THE FAUCET? ALSO IS TANK BY OR NEAR A WINDOW?

One thing to enforce with a mixed reef is you must run carbon ( I run chemiPure blue) as softies/LPS emit toxins that will affect SPS in the same tank. Carbon will reduce these toxins.

Assure you have the following in range:

TEMP IS 77.5 TO 78.5
Salinity IS 1.026
Mag 13
CAL is 420
Alk is 8.5
ph 7.8 to 8.2
Ro/Di is 0ppm
 
one year, chemiclean should do the trick?
I'm not a fan of jumping right to chemical solutions. When I had cyano issues, I just vacuumed them out with water changes and adjusted my flow in my tank (either repositioning pumps and/or increasing flow). This fixed the issue for me after a few rounds of water changes.
 
chemiclean process started , maybe ill update in a week the progress.
 

TOP 10 Trending Threads

WHAT MOST OFTEN MAKES YOU REACH FOR YOUR CAMERA AROUND THE REEF?

  • Coral behavior (feeding, extension, or movement)

    Votes: 3 10.3%
  • New growth or a color change

    Votes: 3 10.3%
  • Unusual fish behavior

    Votes: 0 0.0%
  • The whole tank looking especially good

    Votes: 11 37.9%
  • Something I want to document in case it changes

    Votes: 2 6.9%
  • A funny or unexpected interaction

    Votes: 2 6.9%
  • I usually put the camera/phone down and just watch

    Votes: 4 13.8%
  • Other (Post in the comments)

    Votes: 4 13.8%
Back
Top
Home
Post thread…
Market
What's new