MP10/MP40/MP60 Anemone Safe REPLACEMENT guards

[Evan West]

I was using the ones Bulk Reef sells and those aren't replacement covers but slip over the originals and make them very bulky and also restrictive. I just got these and they are awesome and I was able to turn my pumps back down.

Glad they are working well for you! Thank you for the good feedback :)

 

[dadnjesse]

here is a comparison the original, Bulk Reef one and yours

 

[Evan West]

here is a comparison the original, Bulk Reef one and yours

Super awesome to see the side by side comparison! Thank you for posting that!

 

[Lance M.]

Sent payment for 1... Kind of clicked too fast, I would like a MP40 guard. Interested to see how this works with my 14 (so far) bta's. I myself have a Stratasys printer at work, along with a couple small SLA printers.

 

[Evan West]

Sent payment for 1... Kind of clicked too fast, I would like a MP40 guard. Interested to see how this works with my 14 (so far) bta's. I myself have a Stratasys printer at work, along with a couple small SLA printers.

I will get it printing and on the way, sent you a PM. Wish I had access to a Stratasys printer those things are amazing! These covers are just FDM printing obviously

 

[Lance M.]

I will get it printing and on the way, sent you a PM. Wish I had access to a Stratasys printer those things are amazing! These covers are just FDM printing obviously

They're solid and very consistent when maintained properly. I actually wish I had a powder bed though... but I just have to send away for sls parts.

 

[CCK_8814 Verified Sponsor]

Received mine today. Looks awesome. Within few hours of installing and turning my MP10 back on in nem tank the change in flow made a nem release and it ended up stuck to the side of the guard. So already it’s paid for itself, the nem couldn’t get through to be shredded and the anemone while not happy is alive.

 

[Evan West]

Received mine today. Looks awesome. Within few hours of installing and turning my MP10 back on in nem tank the change in flow made a nem release and it ended up stuck to the side of the guard. So already it’s paid for itself, the nem couldn’t get through to be shredded and the anemone while not happy is alive.

Oh man! That is a close call and I am really happy that it stopped another disaster! This is the first third party testimony of them working for others so im super happy to hear they are doing their job like I have seen in my own tank....Just curious when you say "change in flow" was it a change in flow caused by the guard or was the mp10 off for a time and then turned back on? I do not observe a change in flow pattern with the guards in my own tank so im curious what your observations are if it is the guard causing a change in flow.

 

[CCK_8814 Verified Sponsor]

Ya if the lights would have been on I’d of taken a picture. It was change in flow from the MP10 being turned back on. It had been turned off since the last “incident”.

 

[Evan West]

Ya if the lights would have been on I’d of taken a picture. It was change in flow from the MP10 being turned back on. It had been turned off since the last “incident”.

Thank you for that clarification!

 

[chaoticreefer]

I want a pair for MP40s. I will send a pm.

 

[CCK_8814 Verified Sponsor]

Well here’s some proof for anyone questioning or on the fence about these guards. Yet another anemone saved. My nem tank hasn’t been right since a few weeks ago when my MP10 shredded a few nems (pre installation of Evans MP10 nem guard). After removing the nem from the guard the foot was completely intact, no damage at all.

 

[Evan West]

Well here’s some proof for anyone questioning or on the fence about these guards. Yet another anemone saved. My nem tank hasn’t been right since a few weeks ago when my MP10 shredded a few nems (pre installation of Evans MP10 nem guard). After removing the nem from the guard the foot was completely intact, no damage at all.

Super happy to see another anemone saved! Thank you for posting as well :)

 

[ReeferReefer]

Great product!

 

[ReeferReefer]

Just ordered. I did not find a place to state which model it is. I need a guard for the MP10

 

[philosophile]

Hi I'd like 2 mp40s! the checkout isn't working for me though, it keeps saying that it needs a whole number or something.

 

[Nubbie]

Hi Evan, I would like to purchase 2x mp40 guards. When you get a chance, could you please DM me on how I would go about placing this order? Thanks!

 

[ReeferReefer]

Hi Evan, I would like to purchase 2x mp40 guards. When you get a chance, could you please DM me on how I would go about placing this order? Thanks!

There is a button on the top right of the thread. You need to be on the actual website though in desktop mode, it wont show up in tapatalk.

 

[ReeferReefer]

For sale is the NemSafe Mp10/Mp40 replacement cages.

These are not go over guards and replace the stock removable cage! (See Pics)
​

Your guards are getting a positive reception on Reddit.

https://www.reddit.com/r/ReefTank/c...mone_guard/?utm_source=share&utm_medium=web2x

 

[Nubbie]

When I click on the top corner, it redirects me to paypal. Then it redirects me back here and there is an error "please enter a positive whole number". I apologize in advance if this is a silly question!