mp40 flashing green/red

[nmo0ory]

hello
so i have 2 of the mp40
and both is flashing green/red
i try to disconnect it and reconnect it but still same problem

what dose green/red mean ?
the pump was setting for some time is that a problem ?

 

[Dragon52]

Try this
https://support.ecotechmarine.com/h...-My-VorTech-Controller-is-flashing-Red-Green-

 

[nmo0ory]

Try this
https://support.ecotechmarine.com/h...-My-VorTech-Controller-is-flashing-Red-Green-

i am trying to run it only the dry side and still
try to swipe controller between each other and still both not working
as soon as i connect it the pump is moving very littel and then stop and give green and reed in both

 

[Dragon52]

I would Reset Both per the instructions & then set the mode you want.

 

[Mical]

Do a Hard Reset of both pumps ->

 

[nmo0ory]

I would Reset Both per the instructions & then set the mode you want.

Do a Hard Reset of both pumps ->

i can't do any thing
i tried it
its flashing only red/green never changed
i try to disconnect the dry side and run only the controller and it give me red/orange but also i can't reset it

 

[Dragon52]

i can't do any thing
i tried it
its flashing only red/green never changed
i try to disconnect the dry side and run only the controller and it give me red/orange but also i can't reset it

I would call Ecotech, they are real good about helping figure things out. You also said they had been sitting for awhile, I would take the wet-side apart & see if the shafts are stuck.

 

[nmo0ory]

i did call Ecotech but there was not helpful at all
they give me a place to call to help me and that one was closed for ever

but i figer it out it was not the controller problem
it was the power supply.. i try it with working controller and it was working i thought it was controller but then today i try to change the power supply and it was working just fine!!

but now for new power suplly can i use any power supply with 2.5A 24v and it will work ?

 

[faiz_latif]

i did call Ecotech but there was not helpful at all
they give me a place to call to help me and that one was closed for ever

but i figer it out it was not the controller problem
it was the power supply.. i try it with working controller and it was working i thought it was controller but then today i try to change the power supply and it was working just fine!!

but now for new power suplly can i use any power supply with 2.5A 24v and it will work ?

This is the answer. Mine was flashing green and red as soon as I started it up. Tried different wet sides all the buttons did nothing. After reading this I put another power supply with the same voltage as mine and bam It worked. U saved me so much time and money lol I thought I was going to have to buy another wave maker.

 

[zigzag930]

Same here... just determined the PS was the culprit for my Red/Green stall. $12 on Amazon and I'll be up and running

 

[Sm2]

Same here... just determined the PS was the culprit for my Red/Green stall. $12 on Amazon and I'll be up and running

Can you link the power supply?

 

[zigzag930]

Can you link the power supply?

Sure, here you go...

UpBright 24V AC/DC Adapter Compatible with VorTech MP40 MP40w QD ES MP 40 w MP40QD MP40ES pump Ecotech Marine QWD for Fish Aquarium Switchbox F10723-A 24VDC 3A DC24V 3.0A Power Supply Cord Charger PSU​

Price is now $19.00 - must have lucked out and got it when on sale. I can't see to post the link as it just shows as AMAZON.

 

[Sm2]

Sure, here you go...

UpBright 24V AC/DC Adapter Compatible with VorTech MP40 MP40w QD ES MP 40 w MP40QD MP40ES pump Ecotech Marine QWD for Fish Aquarium Switchbox F10723-A 24VDC 3A DC24V 3.0A Power Supply Cord Charger PSU​

Price is now $19.00 - must have lucked out and got it when on sale. I can't see to post the link as it just shows as AMAZON.

Thanks so much!